Search results

  1. blue46gt00

    help with transbrake and 2 step wiring

    I have a MSD Launch Master 2 step. I was using with my 5 speed and it worked great with the clutch. Now I have went to a C4 with transbrake. I got a hurst quarter stick with the pistol grip button. I wired the red wire to 12v and the black wire to the transbrake and the other transbrake wire to...
  2. blue46gt00

    c4 swap help

    I have a 2000 Mustang Gt that I have gone from the T45 5 speed to a c4 automatic. What do I do to wire in my neutral safety switch on my hurst quarter stick to my car? Do I have to do anything with the wires that were on the T45? What do I do with the wires that were on the clutch pedal? Do I...
  3. blue46gt00

    Help

    I have a 2000 Mustang GT. I went to manual brakes and manual steering. 1) I got the skinny kid manual brake kit with there master cylinder. How do I connect the braided lines to my stock calipers? Has anyone done this? 2) How do I delete the powersteering pump? I can't seem to...
  4. blue46gt00

    manual to auto what do I need

    Since I mainly bracket race and my car is a drag only car. I want to go to a auto. I have heard a lot about going c4 but they don't last long. Ive heard go turbo400 but they are heavy and not as efficient. I can't seem to find anything about a powerglide with a Modular motor. I don't think the...
  5. blue46gt00

    New rearend and New best ET

    Its been a while since I've posted but here is the story. I was in Boise at the Night Fire Nationals and in the 3rd round of eliminations I heard a loud bang on launch and the car almost hit the wall. Luckily I kept it off the wall but the 8.8 rearend was toast. I had my axel tubes welded but...
  6. blue46gt00

    Need some opinions

    Need some opinions -------------------------------------------------------------------------------- My current setup is 26x11.5x15 ET streets on 15x10 weld rims. With the headers and the race tune I think I'm making close to 400hp now. I'm looking at getting new slicks this season and I...
  7. blue46gt00

    408 stroker in my 2000 GT

    I have a friend that is willing to give me 6 grand for my motor tranny and supercharger setup in my GT. He has a 351 windsor block that I was thinking about stroking to 408 and putting it in my gt with a powerglide trans. Looking to get the 408 to about 650 hp. Is this possible in my GT. I did...
  8. blue46gt00

    Video of my win in Super Street!

    My Super Street win at the Nitro Extravaganza in Spokane Washington! http://www.youtube.com/watch?v=7jo_4WkZ6Gg
  9. blue46gt00

    Fuel Pressure Help??

    I ran at the strip this weekend and the car was running slower than normal and just running rough. So i checked the plugs and saw a little detonation so I added 2% of fuel and put in new plugs and made a pass pulled the plugs and they looked fine. But I noticed on that pass that the fuel...
  10. blue46gt00

    Leaking Injector??

    Noticed at the track towards my last pass that when I would cycle the key the fuel pressure would hit 41 psi and slowly fall to 38psi. When the car is running it seams fine. Good fuel pressure. Looked for fuel leaks and could not find anything. Before the when I would cycle the fuel pump it...
  11. blue46gt00

    What do you think of the new gauge panel?

    Thinking of putting the fast air/fuel meter in the middle.
  12. blue46gt00

    New track times, video inside.

    Here is a video of my best ET yet 7.60 at 92mph with a 1.66 60 foot. Sorry about the low quality. http://youtube.com/watch?v=bYjqAcKo63c
  13. blue46gt00

    How to get 60' time down?

    Went to the track yesterday for the second points race. I'm getting allot of tire spin out of the hole. I'm launching at 4500 and just dumping the clutch. Getting good bark in second. My best 60' was a 1.70 yesterday. I have Eibach pro springs that lower the car 1 1/4" and stock shocks and...
  14. blue46gt00

    First trip to the track

    I'm very happy with the results being my first time at the drag strip. The car ran awesome! 1/8th mile track Best ET = 7.664 at 91.46mph Best 60' = 1.703 I need to work on my reaction times. Got better threw the 2 day event. Got 11 passes in ranging from 8.150 to 7.664. I kept getting...
  15. blue46gt00

    What gears?

    Ok decided to build my 8.8 with Moser 31 Spline axels, t/a diff cover, gears,weld axel tubes/torque boxes, and an Eaton posi. I plan on running 1/8th mile mostly and quarter mile sometimes. With my mods that are listed below should I get a 4.10 ring and pinion or 3.73 ring and pinion? I'm...
  16. blue46gt00

    What would you do first?

    I have enough money to do my next mod. What do you all think I should do first. Intercooler, piping, pulley, belt, & dyno to check A/F = $570 Wideband-can't decide between wideband commander or FAST. With the fast I can replay on screen but the WC I need to buy a laptop to play back...
  17. blue46gt00

    Bypass Valve??

    What do you all think of this bypass valve? Will it work better than my stock bosch one? Thanks http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=019&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=290079086035&rd=1,1
  18. blue46gt00

    intercooler ??

    What do you all think about the Reichard Racing Intercooler? Looking at the air to air that supports 1000hp. Link: http://www.reichardracing.com/intercoolers.php
  19. blue46gt00

    flywheel?

    What do you all think of this flywheel. Thinking about buying it and a spec stage 2 clutch. Will this be ok on my 2000 GT. Thanks. http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1,1&item=180019665621&ih=008&sspagename=STRK%3AMEWA%3AIT
  20. blue46gt00

    car is acting up please help

    My car was running just fine and then I took out my a/c and now only when I'm driving the car at a constant speed and rpm it acts like it is missing. Then when I push in the clutch the idel drops really low and almost dies and sometimes does. At first I thought maybe it was a miss and replaced...
Top Bottom
Back
Forums
Menu