Search results

  1. 9

    express down?

    Has anyone looked into adding express down to the passenger side of an 01-04 stang? I tried searching both on here and over at the corral with no success, any insight would be appreciated.
  2. 9

    ABS Sensor Bolt

    Does anyone know what length/thread size the bolt is that holds the ABS sensor to the spindle (01 GT)? I didn't have the proper socket when I removed my sensors so I had to use vise grips and, as one might expect, the torx head didn't fare so well. I'd like to replace this bolt with a hex head...
  3. 9

    bullitt motor or just intake?

    Is there any way to differentiate a legitimate bullitt motor from a standard GT motor with a bullitt intake? I'd like to know if there are any stampings on the block/heads that would indicate the actual origin of the engine.
  4. 9

    Rad Cover Decals?

    Hi, I have a 2001 Mustang GT that did not have the plastic radiator cover when I bought it. I bought a cover off of ebay and it had the sticker on the passenger side regarding freon and such, but it looks like there is a sticker that goes on the driver side as well. Is this the serpentine...
  5. 9

    Aerostar 5lug swap parts?

    I have a '94 Aerostar 2wd that I can take any parts off of I want, are there any parts worth stealing other than the passenger side axle and both rear drums? Can any of the front suspension stuff be used? :flag:
  6. 9

    mark viii MAF?

    Can a 80mm MAF sensor (for 24 lbers) from a '97 mark viii be used on a '90 5.0L? If so, where can the adapter flange be purchased from?
  7. 9

    SLP Performance numbers?

    Does anyone know the actual dyno gains for the fox loudmouth catback? I'm really trying to justify the cost to myself because the clips I've heard sound awesome and I'm tired of my flowmasters..
  8. 9

    current draw

    Lately my car has decided that it wants to drain the battery if it sits too long without running. I had the alternator checked and it's good, and I removed all stereo fuses; draw still exists. I started removing wires from the battery side of my starter relay and got rid of the draw when I...
  9. 9

    year for adjustable cable?

    Did any year stangs come with an adjustable clutch cable? I'm doing a t5 swap and my pedals came with a non-adjustable SVO quadrant, but the cable I have is also non-adjustable so I'm kinda stuck right now. :mad:
  10. 9

    rear diff tag?

    My rear diff tag reads as follows, anyone know how to decipher it? 203F 3SL08A887C30 thanks
  11. 9

    cam advice needed.. advance/retard?

    Hey guys, I am running the stock cam with my current setup and wondered if I would be well off to advance/retard the cam, or just leave it lined up? The new setup is as follows: 306 shortblock 9.5:1 compression, DSS kit stock crank, rods fresh GT40 irons stock cam 1.7 RRs Tmoss...
  12. 9

    horsepower predictions?

    Hey guys, I'm gonna be putting my engine together soon and wondered what kind of power you think it'll make? The combo is as follows: 9.5:1 compression shortblock (DSS kit), balanced GT40 irons with upgraded springs 1.7 RRs TMOSS lower/Stock upper stock cam possibly 65mm TB? 2.5"...
  13. 9

    Where to buy pistons?

    I'm working on my engine buildup but I need to get pistons bought so the machine shop can match the cylinder bores to the pistons.. problem is, I don't know where to get the pistons? I want to get about 9.5:1 CR using the stock heads (64cc chamber) and stock stroke. Help!
  14. 9

    Budget rebuild, what to do?

    I'm rebuilding my 5.0 and looking to spend around $1000 tops. What's the best route to go? I have to bore the block so new pistons with a higher compression ratio are a distinct possibility, but will re-use the stock crank/rods. What's the best way to go in this rebuild to get the power up...
  15. 9

    rebuild prices?

    I just picked up a 5.0 longblock that I'm going to rebuild and put into my car. Pulled the heads and the cylinder walls look fine, so I'm wondering what it costs to just put in new rings/bearings and have the crank turned? Planning on re-using the stock rods/pistons. Thanks
  16. 9

    Driver's front tire rub?

    Lately my '90 Coupe has developed a noticable rub whenever turning the steering wheel about 1/4 turn clockwise (tire rubs on the front fiberglass fender extension). What could be causing this? The car doesn't sit excessively low like it has a broken spring or worn strut, but it acts like it's...
  17. 9

    Cobra motor swap?

    Well, my car has been burning oil for a while now and this summer something is going to be done about it.. I just stumbled upon a built up cobra 5.0, supposedly made 275hp at the rear wheels when it was in a mustang. The owner is asking $1200 which may be negotiable. There's nothing wrong...
  18. 9

    Not exactly stang tech but..

    Long story short, I was scraping intake gasket off of the lower intake manifold on a 2.9 and a piece of the gasket fell down into the intake runner. How the heck do I get it out? I tried blowing air back up through it with the intake valve open but it won't blast it out of there. Ideas? :shrug:
  19. 9

    Heater quit after TMOSS intake swap?

    My heater used to work great in my car, but after I put in my Tmoss lower intake I noticed that it doesn't work worth a crap now. The temp gauge goes up to what it should and the car warms up normally, but the heater only blows out lukewarm air at its very warmest. I don't have any antifreeze...
Top Bottom
Back
Forums
Menu