Search results

  1. shootshescores

    Where can I find 17x8-4lug-silver-Cobra R wheels without a machined lip?

    I have an 89' fox coupe and I've been scouring the internet looking for a pair of silver (no machined lip) 17x8, 4 lug Cobra R wheels. Exactly what FRPP offered in their catalog a few years ago. It looks like they have discontinued them as they are not in the 2011 catalog. I currently have a...
  2. shootshescores

    Valve Cover Question

    Has anyone ever had a problem clearing their aftermarket roller rockers with ford motorsport valve covers such as these?
  3. shootshescores

    Oil Breather, Or No Oil Breather?

    I need a set of valve covers to cover my new roller rockers. Should I utilize a breather or just cap? What is there to gain by using a breather? I am upgrading my H/C/I with some new roller rockers and I'm not sure which way to go. Any help?
  4. shootshescores

    Just installed my JLT CAI!!!

    I just installed my JLT CAI and WOW! I didn't think I would notice any difference seat of the pants wise, but I did. It really looks great and brought on some sotp power. The RPM's climb much faster and my stang seems to be idling much smoother. I've always heard that the stock air box with...
  5. shootshescores

    Specs on Anderson N-412 cam?

    Anderson keeps the specs on his cams under lock and key. Some people say its because he borrows the specs from other manufacturers. That I don't know about, but I do know that I would like to see the specs on the N-421. There is a great post on another forum that pulls up in google that gives...
  6. shootshescores

    73mm Brake Caliper Help

    So according to the fox brake upgrade link: http://svo73mm.cjb.net/, calipers off of a 91' Lincoln Mark VII and those from an 86' SVO will bolt right up to an 87-92 Fox Mustang. After comparing them to those from an 89' 5.0 Mustang I found a major difference. 91' Lincoln Mark VII...
  7. shootshescores

    Looking for others who have the SSBrakes rear disc conversion kit...

    At the end of last year I installed the Stainless Steel Brakes-rear disc conversion kit. After the install I noticed a decrease in braking ability, as opposed to a $700 improvement. After numerous back & forth emails with their tech department, and bleeding the brakes probably way more than...
  8. shootshescores

    EGR elimination ?'s

    For all of you who have removed your EGR's and/or went to a blank, could you provide some details on the process as well as some input on your engine's behavior after removal? Just looking for some details. Going to be purchasing a 70mm TB soon and was just wondering if I should keep the...
  9. shootshescores

    Anyone running an Anderson N-41 Cam?

    Need help choosing a Cam Just wondering if anyone has any details about the Anderson N-41 Cam? I checked out the dyno info on their website, but I was just wondering if anybody has any seat of the pants info about how it feels and performs.
  10. shootshescores

    Just Dumped Codes...Advice ?\\?

    I've owned my 89' for 7 years now. I bought it completely stock with the exception of a removed air silencer and an offroad H-pipe. The previous owner was still utilizing the stock mufflers so soon after buying the car I got a set of 40 series flowmasters. Not very long after the new...
  11. shootshescores

    Any luck with buying used heads online?

    I've been struggling to save for new heads for a long time now. I find myself getting nowhere fast with it. When an opportunity comes up there's always a setback following close behind. I have recently been cruising ebay and some online classifieds checking out some Trick Flow Twisted Wedge...
  12. shootshescores

    Will a 315/35/17 Nitto D.R. Fit on a 17x9" wheel?

    I just read a recent post where someone claimed a buddy was running a 315/35/17 Nitto Drag Radial on a 17x9" rim. I find it hard to believe. 1) Is it possible? 2) What is the widest size tire that can fit on a 17x9" rim?
  13. shootshescores

    New 5.0 Mustang & Super Fords Article. WOW!

    I just received my newest issue of 5.0 Mustang & Super Fords Magazine on Wednesday, April 3rd. Did anyone read the article featuring the Editors black t-top fox coupe? Mavromont Industries is producing a 17"x10" Pony R wheels and claiming that they can fit a Nitto NT555R Drag Radial in a...
  14. shootshescores

    What size TB for my application?

    I just purhcased an Edelbrock Performer RPM II for my stang. Check out my list of current mods. I will be adding some Trick Flow Twisted Wedge Heads, Cam, JLT Cold air kit, 30lb. injectors, Pro-M 75mm or 80mm Mass air (not sure yet), and all the other smaller accompanying stuff (fuel pump...
  15. shootshescores

    Installed Longtubes Now I've got Idle issues.

    I successfully installed my longtubes last weekend. While I was in there I put in a new set of plugs, same as my old ones, and replaced the motor mounts. After the install I noticed my car is now idling at about 850rpms when before it just hovered under 1000. My idle also surges now. It will...
  16. shootshescores

    I didn't mark initial timing before I turned my cap!

    I didn't mark the initial timing on my harmonic balancer before I turned the cap a few degrees. Now I want to retard my timing a bit since my plugs were n the white side and I don't know how to make sure where my timing is. My harmonic balancer is kind of rusty and its hard to read. What can...
  17. shootshescores

    Tips Installing BBK Longtubes in 89 stang

    Very soon I will be installing a new set of ceramic coated bbk longtubes in my 1989 5.0. I've heard all about having to lift the motor to squeeze the driver side header in place. Does anyone, who has done this install, have any tips they can give me in regards to this installation? What all...
  18. shootshescores

    Whats the difference between header gaskets?

    I have purchased a set of BBK 1 5/8" Long tube headers for my 1989 5.0. I definitely don't plan on using the gasket provided with the headers. From looking at different gaskets from Felpro and Mr. Gasket for my application. My question is, how come the Felpro gasket has square holes and the...
  19. shootshescores

    How will bbk longtubes sound compared to my stock headers?

    I am currently running stock headers to an off-road H-pipe, through 40 series flowmasters. How will my car sound after a set of bbk longtubes with a shorty off-road H and the same mufflers?
  20. shootshescores

    Are quad shocks necessary?

    I am currently running 245/45/17's on 17x9 cobra r rims on all four corners. When I purchased the tires I originally wanted to run a 275/40/17 on the rear and a 255/40/17 up front but I ran into a problem... The rear tire wouldn't come close to fitting because of interference from the rear...
Top Bottom
Back
Forums
Menu