Search results

  1. C

    Injectors....

    I have 19#'ers and i have replaced one already and another is leaking. So i thought i might as well step up to 24#'ers due to cam, heads and intake. What exactly do i need. I know the injectors, but when it comes to the MAF, i found places that only sell the MAF housing thats calibrated for...
  2. C

    Valve covers...

    Has anyone had a chance to modify their stock valve covers to fit 1.6/1.7 rockers? I have seen it done a bunch of times by people in MMFF mag. but i have never seen posts from people who have actually done it and seen where to modify. What valve covers will clear 1.6/1.7's. Im not worried...
  3. C

    Pulled codes...

    Im having a hard start, long cranks at times figured i might have a stuck or faulty injector or a fuel pump leaking down. Connected the wires and got these codes... the first two codes came up twice in a row. Kinda weird. 15, 15. Then it paused and went on to show: 21 Engine Coolant...
  4. C

    Seat tracks....

    I bought a pair of power (drivers) seat and normal pass side from a 98 gt leather. No seat tracks. Can i use the fox tracks ? I have one track from drivers side ( power ) will the connectors connect? I have a empty connector under my manual seat in my car. If i hook up will it work ?
  5. C

    LONG cranks....now problem.

    Ever since i bought my car and started modding it i noticed a long crank. Sometimes it would crank longer than other times. Well yesterday i went grocery shopping. Came out got in and turned the key and it cranked and cranked and cranked...then started. I was worried it might not start. Not a...
  6. C

    Short ones or long ones...

    I need new exhaust. Running stock everything except a catback the prev. owner put on. I want front heads back. Unsure on what i want i was hoping for some answers and opinions. Im open to both. Shortys or equal lenght. whats the diff and should i look for one of the other. Im not worried...
  7. C

    Gangster lean...

    Im sick of it. I want to sit straight up and look normal. Is it common for these fox seats to have a lean to the right side of the drivers seat. I want to sit straight and it keeps sucking me to the right side. I took out the seat and couldnt find any problems. :shrug:
  8. C

    anyone good at making sigs?

    I got a pm saying my sig is too big. And its my old car. So could someone please do me up a sig.. Here are a few pics. Thanks
  9. C

    Disappointed....93 LX vs. 86 GT

    So i finally got everything straight on my car and a buddy in his 86 GT wanted to cruise. So we did...then i asked him if he wanted to run it on the highway. So we were driving around and we got to the on ramp and as soon as i saw his brake lights go off i hopped on it in second gear and i blew...
  10. C

    1.7's....

    Ford racing X303 heads, with 1.7's. Alot of people tell me to ditch them because i will have piston to valve problems. Whats the big difference between 1.6's and 1.7's. Should i dump the 1.7's and get 1.6's ?
  11. C

    Elect. Fan...

    Installed a elect. fan and got everything wired up. Have my switch, which has power, ground and acces. power. Well, With everything wired up when i attach ground to the switch my fuse blows that i put acces. power to and ground from. If i leave the ground off the switch my fan works fine...
  12. C

    F-cam questions

    I have trickflow upper and lower. Stock heads and valve train. plugs, wires, cap, rotor, and my waterpump **** it. So i am replacing it. I have a f-cam i was going to wait until i put on my vortech before i installed it. But can i install it right now with everything else being stock. Or do i...
  13. C

    1986 GT with a 93 Upper Intake....

    Sold it to a buddy because in a Mustang builders book i have says they give good power inscrese. He says it has a good difference in power, but it idles horrible, and its jerky and smells rich and gets hot. Any thing?
  14. C

    Common Vaccum leaks....

    As a few of you know i put on a Trickflow intake with tB and EGR and many more mods. Well the INTAKE itself is howling like crazy. Its deff. NOT the TB. I know this noise. This almost sounds like a terrible vaccum leak. BUT....cant find it. Rechecked all vaccum and removed the intake...
  15. C

    After putting on new parts...

    PICS! Stock motor Middle of install Finished This is just a Whipple 500hp kit from Ford Racing i installed on Friday on a 2007 Shelby GT. 4.6 3v
  16. C

    No power up top after intake and more

    It gets up and goes from idle to 3500ish...then it just flatlines and doesnt pick up power at all. I put on Trickflow street heat upper and lower, BBK adjustable pressure regulator ( no pressure gauge but it runs ? ), SN95 fuel rails. JLT Ram air, Professional products 75mm TB and EGR...
  17. C

    Trickflow upper problems...noise?

    Well i bought a JLT Ram air tube, 75mm professional products TB and EGR, Trickflow upper and lower street heat, trickflow valve covers, 1 inch spacer, Adjustable fuel pressure regulator on SN95 fuel rails, new gaskets, coolant service with water wetter. Put it all on and fired it up, and it...
  18. C

    1993 Mustang Lx 5.0 e-brake

    Having concerns about the e-brake cables in the new fox i picked up. Im a Ford tech and when trying to order cables the parts catalog asks if its a 40 or a 60 sleve. Not sure what to use, is there anyone out there with a 93 who has replaced them and where did you buy them. I can get them cheap...
  19. C

    In need of gaskets

    I need some gaskets fast. Summit said they cant ship out until 10/1 on a gasket kit. And Jegs doesnt carry trickflow products..... GRR>.. I need Trickflow Streetheat upper to lower gaskets. TFS-51522007-4 And ford racing Lower to heads gasket kit. M-9439-a50. And Professional Part...
  20. C

    1998 NPI mustang with KB 2.1 ?

    Ok, so i have installed PI intake and cams on the NPI. Have all bolt ons, control arms, clutch, driveshaft..the list goes on. Also have 80shot of nitrous. All the dyno charts i have found online on other forums and such show that the heads are the worthless point on a PI swap. So i was...
Top Bottom
Back
Forums
Menu