Search results

  1. sn9550

    Summit Star wheels

    Thought I would post a couple of pics of my new wheels. When I was doing a search for pictures of the wheels installed on a foxbody I didn't find many so here they are. There rears are 15x8 w/5.5 BS, the fronts are 15x7 w/4.75 BS. My ten hole wheels weighed 20lbs ea. The 15x8 weighed 16.4 and...
  2. sn9550

    How much do you think my car is worth?

    The parts: ENGINE: FRPP hoses, new dipstick tube, Kirban AFPR and Jeg’s gauge, ported GT40 lower and powder coated upper intake, Mr. Gasket 4364 180 t-stat, GT40 manifold cover, new IAC and coolant temp. sensor, BBK aluminum under drive pulleys, Felpro 40620 rear main seal, AFR 165 #1472...
  3. sn9550

    Hiding wires and Stater rely ?

    I'm in the process of putting some wiring in the fender well. Does anyone have pictures of how they mounted the starter relay and wire routing? Sorry for the spelling in the title.
  4. sn9550

    Where did you mount your NHRA legal battery disconnect switch?

    I have a Moroso battery box, cable, lugs and Flaming River Big Switch. I was thinking of mounting the switch behind the license plate. Then using some aluminum stand offs to mount the tag so it clears the switch. Of course I'll have to remove the tag at the track. Any pictures of how you did...
  5. sn9550

    Water pump gaskets and rtv?

    Just curious who uses rtv for the water pump gaskets. In the past I've used it for both sides of the pump to timing cover gasket. What about on the backing plate to pump gasket. Anyone use it there also. I would think it would be more important to use it for the backing plate to pump. I've never...
  6. sn9550

    Mis-understood ARP head bolt instructions...

    I mis-understood the instructions and torqued all the 7/16 head bolts to 85lbsft. I believe they were refering to cast iron with 30wt oil now not aluminum. I know the manual says one torque figure, AFR says 70/80 lbft., and ARP says 60lbft. So do I: a - leave them alone? B - loosen and...
  7. sn9550

    Mis-understood ARp head bolt instructions...

    I mis-understood the instructions and torqued all the 7/16 head bolts to 85lbsft. I believe they were refering to cast iron with 30wt oil now not aluminum. I know the manual says one torque figure, AFR says 70/80 lbft., and ARP says 60lbft. So do I: a - leave them alone? B - loosen and...
  8. sn9550

    AOD shift linkage seal?

    Anyone relaced the seal on the side of the AOD where the shift linkage connects? If you have what dose it entail? My manual doesn't have anything on it. I knew I should have look at it when I had the trans out.
  9. sn9550

    Exact dimensions if SS brake caliper bushings/sleeve?

    Can someone give me the exact dimensions of your stainless caliper bushings i.e length, width, height, i.d., o.d. A drawing would be even better.
  10. sn9550

    Where to get a long post starter relay?

    I'm looking for a starter relay with longer than stock posts/terminals. Anybody know where to get one?
  11. sn9550

    Ford Racing and Edelbrock water pumps?

    What makes the FRPP and Edelbrock water pumps worth $150 over the other $100 or less pumps i.e. Milodon, Flow Kooler, Weiand etc.
  12. sn9550

    Pressure hose and Ford ac delete kit?

    Anyone have pictures of the routing of the pressure hose when using the Ford ac delete kit? On the bottm did you run on the inside or outside of the swaybar? On the top did you run in front of the pump or behind?
  13. sn9550

    Replacing steering rack, which one - TRW or Ford?

    I'm replacing my rack. I already have it out. How do you tell wheather you have a TRW or Ford rack? Do I take it in and let the parts guy look at it?
  14. sn9550

    Only thing in the car is the dash, heater core time?

    My car has been in the paint shop for a year (being painted by a friend(s)) and the only thing in my car is the dash. I was thinking that maybe I should go ahead and replace my heater core, especially since it's been sitting so long. Or "if it ain't broke don't fix it" ? suggestions/opinions?
Top Bottom
Back
Forums
Menu