Search results

  1. Rynb15

    Engine f4te (f150)cam in a foxbody.

    I have an 85 gt. Carbed 302. Bottom end is from a 95 f150. Top end is from original 302 in the mustang. So i assume my motor has the f4te cam in it. This is a project car and i have lots of other things to do before I tear into the motor. Besides a couple oil leaks motor seems to run good and...
  2. Rynb15

    Engine mid/high rpm stumble, idles good.

    Hey guys, got an 85 gt, carbed 302. I took over someone elses project. Stock 95 f150 bottom end, with the 85 gt top end. Edelbrock 600cfm carb. bbk shorty headers. Last owner did install new distributor, durapsark and accel coil. Then it sat several years after this. I have the right firing...
  3. Rynb15

    Picked up an 85gt, need help with year of motor in car/firing order

    Hello, I picked up a 1985 gt project car. Lots of stuff to put back together on this car.But car is staright, not rusty and has a decent interior. Car has a f150 bottom end installed with the 85 mustangs top end. (previous owner did this)The number i got off the block by the starter is 5f30...
  4. Rynb15

    What brand clutch to get?

    This is for a friend, he has an 87 gt. Its has longtubes, cold air intake,4:11s. basic stuff. The clutch just basically exploded one day at the track. He plans on modding the car more but nothing more than 400hp max. Also going to get an aluminum flywheel. What do you guys think would be the...
  5. Rynb15

    Quick smog delete question.

    Ok i installed my headers and pulled out a lot of the smog stuff. Now the pipe that runs behind the heads i can just unbolt and put in thermactor plugs right? Does anyone know what size they are and where can i get them? Autozone? Now to the smog pump. Can i just buy a new belt and forget about...
  6. Rynb15

    Do i need a cat back?

    Would it be bad to just not put a cat back on the car. I know it would sound better with mufflers but would would happen performance wise if it just stopped after the hpipe. It would be like haviging cutouts right? I out a cut out on a camaro and gained about a .1 in the 1/4. Just looking for...
  7. Rynb15

    Started up the stang today.

    Well the car has been sitting for about 4 months now. I pulled it out of the garage and finished putting a few things back together on it. It has just open headers on it right now. And wow was it loud. Sounded like a funny car :shock: But im going to finish putting the rest of the exhaust on it...
  8. Rynb15

    Couple questions on changing out suspension.

    Well i just ordered shocks,struts, and some ford racing c springs. Now im not a total moron when it comes to working on cars but i have never touched suspension before. I guess how hard is it to do? Me and my friend will be doing it and he has every tool known to man and then a few more. So that...
  9. Rynb15

    pics of lowered cars plz......

    Im getting ready to order all new suspension for my car. I want to lower it also. I plan on putting 17 wheels on it as well. So you guys who lowered your cars if you could post pics, and also what set up you went with, and also how much of a drop you did. Thanks
  10. Rynb15

    Suspension help.......

    Ok guys i know nothing at all about suspension. My fox drives like a boat on the highway. Im guessing its all stock and with 210,000 miles its worn out. So what do i need, shocks, struts? I want something thats not 2 expensive but not cheap. And more towards racing than just regular driving...
  11. Rynb15

    Cross threaded a bolt on header,how bad???

    Well they are used macs. And i heard they are hard to line up. But they were all fine except for one on the drivers side. So i meesed with it for awhile and got the one bolt in. So i assumed the 2nd bolt would go in as well. But after its about half way in i realize its cross threaded. So i...
  12. Rynb15

    driver side header help????????/

    I got the passenger side in with really no prob. But not even close on drivers side. If i go from the bottem it dosent fit at all. From the top it hits the brake lines..... how did you guys do it? They are mac shorties btw.
  13. Rynb15

    Started header install, removing hoses??

    So i started the header install. Got everything off but it was a pain in the ass. The stock h pipe had to be cut off it was rusted so bad. Anyways on the new h pipe going on(actually used) the tube for the smog pump is smashed shut. So what should i do with that part that runs back up to the...
  14. Rynb15

    t-5 to auto swap??

    What all would be needed? My t-5 needs a rebuild. It hard to get it in 2nd gear. I guess let me start off with what i want to do. What i currently have to install is=mac headers,off road h,edelbrock performer upper and lower,70mm tb. Next to order= gears(not sure which ones yet) and a nitrous...
  15. Rynb15

    Time for a new tranny, some questions....

    well my 2nd gear syncro has been gone for awhile but i could still slam it into gear at high rpms. Well not anymore. I was out playing last night in it and there is no way to get it into 2nd gear.It just grinds. Tried a few times with no luck. So, i guess its time to do something. Should i...
  16. Rynb15

    got some new wheels for the mustang

    I had to get rid of my nasty rusted pitted 10 holes. The new wheels are nothing fancy. I know they are skinny tires and i have some other ones ill get on there eventually. Now all i need to do is get rid of the rust,dents and get it painted and it will look pretty good.:D
  17. Rynb15

    gt40p heads, direct bolt on?

    I have been looking at getting gt40p heads on ebay. They seem to be a good price. Now do they just bolt on, or is there something else i would need to do to them? Change anything? I am also getting ready to put on a edelbrock performer intake upper/lower with a 70mm throttle body. Would they go...
  18. Rynb15

    Failed emmisions, What could i do?

    I went to get the emmisions done today and it failed. It passed everything but the hydrocarbons. It read a 2.66 and it should be .80. Is there something i could by or do for a temp fix on this? Also my check engine light flashes everynow and then. Was told it could be o2 sensors. Any help would...
  19. Rynb15

    edelbrock performer intake to much for my car?

    My car is basically stock. I am putting headers and off road h on hopefully this weekened. There is a good deal on a upper and lower edelbrock performer intake manifold. What king of hp gains would it be worth? Would i need a bigger tb and if so what size? Also how hard is it to install? Just...
  20. Rynb15

    Do i need a stronger clutch or more power?

    So i went to the track last night. I pulled a best of a 14.1 at 97mph with a 2.01 60ft. The part that sucks is that i have hoosier quick time pros on the back. I could not get a better 60' than a 2.0 I had 15psi in the tires. They hooked so good it would bog the car down when i would take off. I...
Top Bottom
Back
Forums
Menu