Search results

  1. R

    Engine Blocked cam journal/ saddle

    So I'm in the process of assembling my motor after head gaskets and valve seals and I decided to use the garden sprayer method to prime the oiling system, I noticed oil seems to be seeping out of all the cam journals except for the left front most journal so I'm wondering once the motor develops...
  2. R

    Pi cam gear bolts

    I just installed cams out of an explorer in my 96 gt and I noticed the bolts for the gears have smaller threads than my original bolts from the NPI cams. Just wondering if anyone has come across this
  3. R

    Engine Engine keeps flooding out

    I'm thinking maybe my return fuel line is plugged. Can someone tell me which one is the return line at the rail, is it the smaller diameter line I'd like the blow compressed air and see if it goes through. The car will start first thing in the morning and it seems like it's running really rich...
  4. R

    Engine Engine keeps flooding out

    I'm thinking maybe my return fuel line is plugged. Can someone tell me which one is the return line at the rail, is it the smaller diameter line I'd like the blow compressed air and see if it goes through
  5. R

    Electrical Injector harness go underneath egr tube?

    I'm reinstalling my injector/ sensor harness on my 96 vert and I'm not sure if the harness goes underneath the EGR tube and inside of the fuel rails or above the tube and outside and above the fuel rails. Reason I'm not sure is the fact that I got this car with the harness removed. Can somebody...
  6. R

    Engine PI cam journals

    Is it normal to have moderate scoring where the cam ladders ride?
  7. R

    Engine Heater hose difference between the non pi and the pi intake.

    So as you can see in the picture the non-pi has the heater hose coming off of the rear passenger side but the pi intake I got off of a Mercury mountaineer has the heater hose coming off of the front driver side. Do I need a steel line going back towards the back of the intake? I'm not talking...
  8. R

    Interior and Upholstery Seatbelt issue

    So I have a 96 vert with a hardtop the previous owner installed. When I got the car those rear panels in the back seat that house the stereo speakers we're not installed as well as the seat belt reels and retractors and for the life of me I can't figure out how the real and the retractor goes...
  9. R

    WTB/Trade wtb stock pi cams

    Like the sub line says. If anyone has them and wants to sell it would be greatly appreciated.
  10. R

    Progress Thread Need help

    So I just traded my 88 LX for 96 GT that is completely diisassembled. I just picked up a PI intake but I have a few questions. The PI intake has what looks like coolant lines coming off of the crossover. also im loading a picture of some type of sensor that I have no idea where it bolts to...
  11. R

    Fox Odometer kaput

    Ten years ago I bought a cluster repair kit with the two little gears. Now I'm searching and it's like the twilight zone which keeps showing kits for 94-97 model year. Am I missing something?
  12. R

    Fox Carlysle Pa spring swap meet

    Anyone think I can source some E7 heads at the meet. I've never been there but the site says there's like 14 miles of vendors I'm just not sure about finding cast iron heads in this day and age. I threw out 2 sets a couple years ago. One set was 3 bar gt40s. Rats!!
  13. R

    Engine Running stock plugs in my aluminum heads

    So I've been chasing a rough idle for over a year. I just found out that my heads require 3824s which are slightly longer and have a washer. Could running the plugs for the E7s be causing my rough idle and power falling off up top?
  14. R

    Engine Drilled for 1/2" headbolts

    I'm installing a set of ported E7s that are drilled for 1/2" inch on my 302. I'm running studs and I'm wondering if I'll need to use different washers or even bushings?
  15. R

    WTB/Trade Drop in valve springs and retainers.

    Basically need a kit for E7 heads running a mild cam.
  16. R

    For Sale TFS hardened pushrods 6.650

    Less than 50 total miles on push rods. $65 shipped mainland US. Or pickup in phila pa.
  17. R

    For Sale WTB stock heads

    Looking for a decent set of E7 heads.
  18. R

    WTB/Trade Stock injectors

    Looking for good set of 19 pounders.
  19. R

    North East Any events scheduled around philly ?

    Just wondering.
  20. R

    short sound clip of my 95 gt with tfs stage 1 cam

    View: https://youtu.be/LAkycWuK5h8
Top Bottom
Back
Forums
Menu