Search results

  1. J

    Radiator fan won't shut off!?!

    Just started yesterday the radiator fan wont shut off unless I disconnect the battery. The keys can be out even and the high speed fan will still be on. All grounds are attached and fuses are checked. I am assuming the the CCRM is faulty and will need to be replaced or I am probably going to...
  2. J

    My autologic tune... Bad tune possibly?

    Well posted a thread with my dyno results. Here is the situation it made good power on the dyno, however when driving it on street it is a whole different story.... The car does the following things: 1.) Cuts out n just dies basically when you get on it in 1 2nd 3rd and every now and then...
  3. J

    Torching headers to fit

    My headers arent fitting in my car with the highport heads. I cant find a set that is for highports for our cars either. My question is this, they arent that far off from lining up I go the starter in and there is only a few thousandths of a gap where they dont seal so my buddy suggested we take...
  4. J

    Blown331vert: The Undertaking

    Well guys thought I'd make a thread and tell what my project is. First off it was a 94 black gt AODE stock when I got it 3 years ago. Then I put a stock block 347 in it with afr Heads. Just wasnt enough so I decided to go all out with the following build: AODE to tremec 3550 swap 331 dart...
  5. J

    Lower shift boot question?

    I am doing the aode to 5spd swap and when cutting the tunnel I may have took to much material out to fit the 2 front lower shift boot screws in. How important is it to run the lower boot, do I have to ? Thanks
  6. J

    Oil pan for dart motor???

    What oil pan are you guys running with a dart block and a stock k member. My moroso wont fit and am wondering which is the best fit with no modifications. I dont want any fitment issues with the steering rack or k member. Want to bolt it on and drop the motor in my car.
  7. J

    Help me identify my weird rev squeal please???

    My car never did this until 2 weeks ago when installed my supercharger. Its not the supercharger it sounds like its coming from the top of the manifold in back/center or the bellhousing. It only does it after you rev it and it is reving down. I did however change valvcover and reset the preload...
  8. J

    AFM Powerpipe for vortech question?

    How did you guys cut the hole you need to make for the powerpipe? Also could you guys post some pics. Thanks a lot. -Jared
  9. J

    vacum hose sizes?

    What size vacum hoses are on our cars? I am going to replace all the vacum lines after I get off work and need to stop and by them on the way home from work.
  10. J

    HELP! no power after vortech installed

    The car ran great before the vortech sq trim 6-8 psi kit was installed. I changed the injectors, and maf along witht he kit. I didnt use the fmu, or the msd boost redtard box, or the t-rex inline pump. eNow here is what happens the car starts and idles fine but start to run "rough" at about...
  11. J

    Need a Flow Sheet For Granatelli 75MM Mass Air

    just like the title says..I have 30# injectors also.
  12. J

    347 stroker ppl come in...

    i was wondering if i can use my stock oil pan with my 347 kits????
  13. J

    trade you my 24#'s!!!

    Anyone wanna trade their 30lb injectors and matched mass air for my 24's and pro-m mass air meter? under 3000 miles on both
  14. J

    trade my 24#'s

    Anyone wanna trade their 30lb injectors and matched mass air for my 24's and pro-m mass air meter? under 3000 miles on both. pm me its off of a 94 mustang gt
  15. J

    Hp guessing time!

    Forged 347 stroker at 11:1 afr 185 cc heads with 5 angle valve job and port work comp cam custom grind (.565 lift) trick flow r-series upper and lower with 3/8 " phenolic spacer 24 lb injectors(getting to small) prom m mass air (75mm) msd electronics underdrive pulleys cold air...
  16. J

    Loud pop... when i punched it

    so while driving the other day i went and punched it and hit 50 and then let off bc a car was coming around the bend and it was a corner and then i quickly punched it again and a very loud backfire came out. What kind of damage could this have caused? because now my car doesnt seem to want to...
  17. J

    Please help me!!!

    Ok so here is what is goin on. I have a 94 mustang gt. I just did a h/c/i swap and cant seem to get her runing right. First off it doesnt idle right, i cleaned the iac and the tb, and the maf sensor. It will surge like crazy and a lot of times it will just die out, and for reference it is an...
  18. J

    HELP! which oxygen sensor wire?

    First off i have a 94 mustang gt, and i got a autometer air fuel ratio gaue. It says to splice into the sensor signal wire. My question is which one out of the 4 is the signal wire. The colors of the wires are red, black, gray&yellow, and gray. Which is the signal, Thanks in advance guys
  19. J

    HP guess time

    Well here is the deal i got a new engine(stock block) and am debating before goin to the dyno if i am geting a tweecer or having the dyno shop tune it. But i always like the hp guessing game so i throwing it out if anyone want to take i guess id like to see what number you guys think, I will...
  20. J

    Hp guess time

    Well here is the deal i got a new engine(stock block) and am debating before goin to the dyno if i am geting a tweecer or having the dyno shop tune it. But i always like the hp guessing game so i throwing it out if anyone want to take i guess id like to see what number you guys think, I will...
Top Bottom
Back
Forums
Menu