Search results

Hi there, Sorry but I didn't read every single post and thanks for pointing out those facts. Again, congrats on the numbers. :jaw: See ya Michael Plummer

Hi there, Congrats on your numbers but I can understand moneypit94's frustration. Hopefully, I can help. The B41 cam is a great cam for blown applications and I have seen rwtq numbers in the 520-550 range depending on setup. So the rwtq numbers seem to be about right. The AFR 165 are a...

Hi Josh, If you didn't change anything with the computer than you have the EEC-V with a saleen tune. Granted you have a hand-held but you probably just add timing with it. I mean you can't re-write idle, WOT and cruise stratergies with that thing or can you? See ya Michael Plummer

Nice results Edge. How much total timing did you add to gain the 40rwhp increase. See ya Michael Plummer

Hi Josh, Fill me in on some details please. 1) Are you running the EEC-V processor with the Saleen tune? 2) How much boost are you making? 3) Don't remove any fuel to get your A/F ratio down. I'd rather see you increase the boost from the blower or add more total timing. 4) Do you...

Hi there, I'm not sure how you tuned your combo but its best to tune your combo to an A/F ratio of 12:1-12.5:1 (I prefer 12.5:1) without the water/methanol. Then you can add the water/methanol and your A/F ratio should get richer by approx. 1 point meaning your A/F raio would now be 11:1 or...

Okay here's my biased opinion on the whole thing. For the extra money you get the following from Snow Performance: 1)150psi pump 2)Variable Controller: which will allow you to set when the kit turns-on (55% flow) and full-on. This controller also makes it easier to tune your combo. This...

Hi Mark, Most of the 03/04 Cobra's do have a problem with their weak ignition systems and tuners who are not familiar tuning with a water/methanol injection system. One of the problems associated with the 03/04 Cobras is that people over inject them (using larger nozzles than necessary) and...

Hi there, First off, those are awesome results for such a small timing increase...congrats. Now to deal with this methanol is corrosive issue. At 100% methaol is VERY corrosive but at levels of 70% or below the mixture is NOT corrosive at all. I highly recommend that methanol be mixed with...