Search results

  1. J

    How long does your 4.6 take to warm up?

    the guage itself is inaccurate. i have a scan gauge in my car and in the morning IIRC the temp gets up to over 160 before the guage goes over the "C" line and slowly comes up towards the center when the temp hits in the mid 180s. keep in mind the guage stays there while the actual temp...
  2. J

    Convertible Trim Paint Flaking

    i would go with some sem Trim black part #39143 which you can get from your local auto body supply store... For preping make sure you clean them real good, sand it down with like 400, put some etch primer on them and repaint.
  3. J

    Gas prices suck, best gas mileage??

    i average 18-21 50/50 mix, seems like the a/c use is hurting me lately and the gas by me now has an e-10 blend which is also not supposed to help gas mileage
  4. J

    ScanGaugeII Anyone use one?

    i got one back in my tdi jetta days, now i use it in the mustang... once you calibrate it you can look at your gas mileage, fuel useage, fuel pressure length of trip, air intake temp, spark advance, etc. its a nice tool if your trying to improve your driving habits to save gas (which i dont...
  5. J

    New trans and now some questions.....

    im sure someone else will chime in, but didnt the mach 1 t3650 have a different ratio in 5th?
  6. J

    test

    test
  7. J

    Mach460 AUX Ques??

    Ive got the peripheral ipod adapter from cruthfield. It goes for $99 but if you look around you should be able to find a coupon for like 20 off or something. You also need ford wire from crutchfield to connect the adapter to the back of the Mach 460in the cd changer slot. Install is pretty...
  8. J

    Noise after trans fluid change

    Just to give an update, I tried some of the suggestions above : I added more dextron III up to 4 qts to try and eliminate the 5th gear noise, and it was still there in the morning. Also noticed the 1-2 grind came back and shift effort increased. Today I drained the tranny again and went...
  9. J

    Noise after trans fluid change

    hey guys ive got a similar problem on my '03... ive had the car a few months now and it has about 54k on it. since i live in florida most mornings im above 60 degrees in the mornin, but lately its been a little colder. Anyways ive have a slight grind 1-2nd **** in the morning, but i...
  10. J

    PCV valve

    yea it turned out to be the heated one... once you kno which way to turn it out its no big deal... the guys at the parts department were clueless about the different pcv valve, but finally found it after 10 min and it was like 30 bucks...
  11. J

    PCV valve

    hey ive got an 03 gt, I cant seem to get my pcv valve off. I took the hose off, and its got a gray peice on top of the valve cover with a wire that connects to it. I tried pulling it off, then twisting it but it wont budge and at the same time i dont wanna break it... any ideas?
  12. J

    House of Kolor Paint? Is it worth it ?

    Unless your going to do your mustang in Kameleon, 4500 for materials sounds pretty steep. As a distributor for House of Kolor, I can tell you first hand that HOK has a bad rap for being expensive... One of the main reasons for this is, most distributors/shops tend to mark up everything that has...
  13. J

    Premium prices

    did anyone in here go for the powerlease program back in '04, where you bought a terminator, and in turn got priority for the '07??? maybe these people will be gettin some details soon
Top Bottom
Back
Forums
Menu