Search results

I had to grind down the stops on my tensioner.. It gave me a bit more room to run a smaller belt.. I am Vortech Supercharged and the alt. is moved in and messes with the belts postion. Every belt I bought would stretch within 50 miles and rub against itself. I used gates, gator back and...

I have a Cobra with a 1" spacer.. I used a couple of washers and cut out the center bracing were the intake hit. It does not look bad either.. I hear AFM sell a 3/4" lower engine mounts...

Thanks Grady.. I could not find info about the long tubes but I will continue reading your site... Lots and lots of good info... Thanks, Rick

I have had this problem ever since I installed long tubes on my 95 GT. I keep getting 137 and 173 codes. O2s are new. I have adjust the exhaust pluse width but I think it needs more. Has anyone solve this problem with longtubes yet. What did you do.. Any help will be awesome..

Yes all the GT40 family of intakes (93 Cobra, 94 -95 Cobra, Explorer or GT 40 Tubular) will fit the Cobra lower. They are all basically the same. If you go with anything other than a 94 - 95 upper you will have to get an intake elbow or convert to a Fox throttle body setup. They do not...

duhhh to me....That makes more sense.. I will reload my tune and try again.. Thanks..

Ok, I raised my Idle to data log and now it is have inssues maintaing idle.. Very stange.. I even reloaded the tune but it is still messed up.. Might have not refreshed the tune and wtote over it and now it's jacked up. Luckly I have a backup I will try.. BTW I did find some old data logs so...

I'll try to raise my idel a bit. I think I am going to start over with my tune and try out the Cobra's as a base. If I use the Cobra what eles do I need to change besides the MAF Transfer?

Thanks Methodical the MAF Transfer info worked great.. OK... I was finally able to get a copy of the EA software working.. I hope I have the right one.. You have to pay a $55 registration fee to use it. Is this Right? I have not done this yet, so please let me know if I have the right one.. I...

I am using the GT tune.. I was hoping to get someone's successful tune and compare it to the stock and see what and how much they changed stuff.. Methodical hooked me up with a MAF transfer.. (Thanks again Methodical ) It's for a 75MM Granatelli but I also now have a Pro-M bullet sitting on...

Hello, I have had my Tweecer for almost 6 months now. I have read alot but still do not have the knowledge I need. New Baby, so there is not much time to learn any more. Atleast for now.. I was tempted to just go and have a custom chip burned, but I bought the Tweecer for a reason.. to Tweak...

Thanks.. I'll look there.. I have seen DannyDoo at the Corral so I'll ask him...

Your IACV proball just needs to be adjusted.. It is having trouble compensating for the load of the steering pump. Just a tiny adjustment can make a big fix.. Mine did the same thing when I would turn on my AC..

I finally have some time to start tweecing.. I Need a Flow Sheet For a Granatelli 75MM Mass Air cali. for 24lb injectors.. It's the chrome bullet version with a flange.. I have a slight feeling that it is made by Pro-M.. Because when I called Granateeli they said they were not able to...