Search results

MY 96 gt will not start and the theft light is blinking fast, I've tried the key in the door, and unhooked the battery for reset, but still same. Now a few months ago I lost the keys so had a locksmith make new ones could of something happened to the key, what should I try next I heard there...

What years will the instrument cluster will fit the 96 gt? I'm guessing 96-98, but not sure, that is same plug-in.

The 4.6 in my 96 gt is now using oil at a pretty good rate, (out the tailpipe) the only thing is that it was fine before I changed the intake gasket and changed oil!

Getting ready to replace the gasket on the oil cooler I've seen videos on how it is done, didnt see any of them use gasket sealant, is that right?

I just found a coolant leak, right above #4 cylinder, at the intake. What's the best route a new intake seen one on ebay for about 129.00, or is the gasket a common problem with these 4.6, and what brand of gasket is the best.

I just purchased a 96 gt, the issues are many but I'll start with the gauge cluster the water temp is pegged I unplugged the sensor on the engine with no change, and the fuel gauge also is not working correctly only goes to half when tank is full, I am new to sn95s so any help on things to check...

I am replacing my ball joints tomorrow, and need to know if a 95 v-6 is the same as a v-8. I also need to know if they would fit in a 89 lower control arm. I switched it over to five lug years ago from a 95 v6.

I am getting ready to tackle the heater core, just looking for some tips, and is the a/c evap easy to remove, thought I would check it while I'm changing the heater core.

I am replacing my 89's heater core soon, and was going to replace, or clean the evap, but there is very little info on the net about this I have a ahynes manual but doesnt help, the only info I did find says you have to cut open the case to get the evap out, anyone know about this????

After up to normal temp should coolant be draining into the overflow? i pulled the little hose at the rad and it was a constant flow, and when i increased the rpm's the more came out and after a short drive the overflow bottle was full. shouldnt the cap only release coolant after 14-18lb of...

Just curious what a new, still in box 87-93 ford headlight is worth?

I noticed that the drivers seat was a little more moveable than should be so after investigating the front mounting bolt seems to not attached , just wondering how it is attached. i guess will find out tomorrow just thought i would see if anyone has any info..

I need to adjust my fuel pressure but don't have a gauge. When engine is warmed up and I shut it off it will just turn over until I hit the gas pedal then it starts. To me that is too much fuel so which way do I need to turn to lessen the pressure ...in or out.

What do you all think about the 2015 stang?

Hey guys I broke a metal vacuum line on my GT)40 p intake. It broke at intake what can I use to fill the ho

I am looking for any info in where to find replacement pedastals for the 1.6 roller rockers. Friend bought them at a swap meet without realizing no pedestals just the rocker arms. Used ones would be fine but if you know any company that has new ones please let me know your

Can I use the old intake bolts on the swap of gt-40p intake?

I am looking at the fr5oo wheels and wondering if the 10.5 in the rear would work? also it was suggested to use 285/40/17 tires, my car has been lowered 1/2 all the way around.

Went to jump start my 89, after a few seconds the jumper cables began to smoke. I was not cranking on it and the switch was off, cause I was going to let charge, anyway is it a short in the battery, also now i have no dome light. It worked before I hooked them up, I also tried another set of...

Just got it painted what do ya think?