Search results

  1. rideapony

    Extremely Low Mpg...why???

    Hi all, I'm appealing to you expertise and suggestions to mi problem. My MPG es extremely low, I'm not whining just it seems like there must be a problem but hadn't been able to find the root to solve it. I just filled my tank and got around 9 miles to the gallon in the city!!! Purposely I...
  2. rideapony

    Delta Fk45 Dc Controller

    Hi all, currently I'm running the old Delta FK35 DC controller. 8 lost some of the pins where you set up the starting temperatures via jumpers. I ordered the new FK45 which took four days to receive. I was wondering if anyone is running this unit, and how is it working for you. Also how do you...
  3. rideapony

    Fox Cooling System Issues/questions

    Hi all, On my 90 GT I'm running a March Performance UD pulleys Kit 1015 I have no issues until I removed the AC system. I wanted to keep the PS pump down in the stock position but the problem is with the WP pulley, the belt rubs when loading the belt tensioner. To solve this problem I replaced...
  4. rideapony

    90 Gt T5 Issues

    Hi all!! I've been disconnected for a while and need help with this issue: I upgraded my T5 WC with a set of Z specs set of gears with carbon synchros. Since day one I had issues shifting gears @ high rpm it feels like the synchros don't slow down the gears and it is hard to disengage. I'm using...
  5. rideapony

    SCARY HANDLING AT HIGHWAY SPEEDS!!!!!!!!!!

    Hi all 1990 Mustang GT: I'm having a lot of issues with my ride handling at highway speeds, the car wanders so bad that it is scarry!!! This is what I have on the steering and suspension: SN95 spindles, Polyurethane red lower control arm bushings, Poly sway bar bushings and links, Bilstein...
  6. rideapony

    HOW TO SOLVE ERROR CODE 34!!??

    Hi all: I'm having a big issue with error code #34, this after I cleaned the inside of the throttle body. I recently replaced the EVP sensor. I tested it yesterday and it shows 0.45 Volts between EVP and Signal Return cables, the book says that it should be 0.67 Volts or less so it is good...
  7. rideapony

    DELTA DCC CONTROLLER JUMPERS SETTINGS

    Hi all, Need help with the jumper settings for a Delta DCC controller. I have a nice Taurus fan and Delta controller set up but my temperature runs under 180 degrees while using the jumpers on 6-8 and 7-9. I would like to be around 190 to 195 degrees which is close to stock average...
  8. rideapony

    GEARS INSTALLATION HELP

    Hi all, This time I'm installing a set of 3.55 gears, to be precissed I'm transfferring them from my old rear end housing to a newer one which I already painted and ready to go. I've been reading a few installation instructions and just want your opinion. The newer rear end came out of a '95 GT...
  9. rideapony

    GEARS INSTALLATION HELP

    Hi all, This time I'm installing a set of 3.55 gears, to be precissed I'm transfferring them from my old rear end housing to a newer one which I already painted and ready to go. I've been reading a few installation instructions and just want your opinion. The newer rear end came out of a '95 GT...
  10. rideapony

    Bad Vibration at high speed

    Hi all, I have been dealing for a while with a bad vibration at around 70 and up mph. The vibration seems cyclic because sometimes it runs smoother than others I even noticed that sometimes when going down hill itstarts vibrating suddenly and intermintently like...
  11. rideapony

    306 right set up

    Hi I have a 306 with 5 spd transmission and was wondering what is the proper set up for it. Please see my signature for details. I would like to upgrade the TB, MAF, Injectors, Fuel Pump and FPR. What sizes??? Any ideas? Thanks, Nick
  12. rideapony

    Need Some Upgrades for my 306

    HI ALL!!! I've been off line for a while and just want to ask for help on some set up improvements for my 306. The components I actually want to improve are: TB, MAF, Injectors, Fuel Pump/FPR. Please list dimensions and if there will be any improvements or let me know if it doesn't even...
  13. rideapony

    Need Some Upgrades for my 306

    HI ALL!!! I've been off line for a while and just want to ask for help on some set up improvements for my 306. The components I actually want to improve are: TB, MAF, Injectors, Fuel Pump/FPR. Please list dimensions and if there will be any improvements or let me know if it doesn't even...
  14. rideapony

    Hesitation and lack of power when cold

    Hi all, I search for help regarding a hesitation and lack of power on my 1990 GT. I have a TFS 306 and so far I've been troubleshooting this issue for a while. Here are some of the settings I currently have: No error codes from EEC IV, stock injectors, new MSD wires, new ECT and ACT sensors...
  15. rideapony

    Upgrading from 130 to 200 AMP 3 G alternator Upgrading

    Hi all I've been researching regarding the possibility of upgrading the 130 AMP alternator I have on my 1990 GT which came from from a SN95. According to my investigations this alternator is what they call "Large case" So my project is to change the output of this alt. to deliver 200 AMP. For...
  16. rideapony

    Guess what??...Another compression question!!!

    :shrug: :bang: Hi all, I ran into a very strange situation with my intake gaskets. My engine is freshly rebuilt with about 2,500 miles. It started running like crap so I tested the intake system with a smoke machine, sure enough there was a vacuum leak by the cyl. 2 runner. So I removed the...
  17. rideapony

    TOO RICH????!!!!

    :( Hi all, Finally I'm driving my new rebuilt 306. It runs fine but I noticed my fuel economy is really bad (or maybe not?). I'm on the final stages of breaking in the engine and the clutch so haven't push it too hard and my fuel economy is between 12.5 and 14 MPG mostly city, is it bad...
  18. rideapony

    STARTING PROBLEMS

    Hi all, I just finished installing a brand new rebuilt 306, everrything is plugged and all the fluids loaded ready to run BUT IT WON'T START!!!!! so far I checked these: Spark from coil (good) Spark from wires (good) Wires resistance (good) Firing order (correct 13726548) Cylinder #1 at TDC...
  19. rideapony

    Lowering my '90 GT

    :shrug: I need help regarding how much to lower my ride with the minimum rubbing possible. I have 245/45/17's all around, 13" rotors at front and stock width axles, if anyone can help with some specific suggestions regarding springs brands and how much drop should I expect. I would appreciate...
  20. rideapony

    Fuel injector question

    :shrug: Hi all, I have a question regarding fuel injectors, I replaced my stock chunky fuel injectors on my '90 GT with the new skinny all plastick orange Design III disc type. I heard that these injectors are an upgrade because they deliver fuel better. I can feel a bit of a difference...