Search results

  1. L

    92 LX 5.0 T5 with vibration at 85 mph or 5000 rpm??

    Vibration and noise at that speed and rpm are normal with a t5. The t5s were mated to engines that were meant to be shifted at 5200 rpms. you are at the top of the rpm band. also keep in mind that if you are using the stock gauges from your 92 stang they were very inaccurate at higher rpms...
  2. L

    shifting gears ?

    Hey I work for pro 5.0 and MGW Shifters are not the same. The reason why our shifter and Steedas shifters are more expensive is because our shifters are more expensive to make. We both use billet components through out. Our shifters are made to shift better 50,000 miles from now. We even use...
  3. L

    Benefits of a Short Throw?

    The MGW is garbage. Buy a Pro5.0 or a Steeda.
  4. L

    What shifter knob will fit this shifter?

    It is probably for the GM transmissions t5 and t56 in the camaro that came with a 15mm threading. if that is the case it wont fit a mustang. Mustang threading is 12mm by 1.75 pitch
  5. L

    2005 Hurst shifter?

    All aftermarket shifters will resonate some of the transmission noise because they eliminate all of the rubber. If it is more important to have a quiet shifter than one that greatly improves the shifting of the car, you should probably consider staying with the stock one.
  6. L

    To wait for MGW or not?

    -------------------------------------------------------------------------------- Hey I work for pro 5.0. We both use billet components through out. We think Steeda made a great shifter. Just to tell you about our shifter, we use anodized steel on all of the wearable parts that take the most...
  7. L

    steeda tri-ax short shift v. hurst SS?

    -------------------------------------------------------------------------------- Hey I work for pro 5.0 and the reason why our shifter and Steedas shifters are more expensive is because our shifters are more expensive to make. We both use billet components through out. Our shifters are made...
  8. L

    B&M or MGW Shift Kit?

    -------------------------------------------------------------------------------- Hey I work for pro 5.0 and the reason why our shifter and Steedas shifters are more expensive is because our shifters are more expensive to make. We both use billet components through out. Our shifters are made...
  9. L

    B&M Shifter

    -------------------------------------------------------------------------------- Hey I work for pro 5.0 and the reason why our shifter and Steedas shifters are more expensive is because our shifters are more expensive to make. We both use billet components through out. Our shifters are made...
  10. L

    Shifters which one

    -------------------------------------------------------------------------------- Hey I work for PRO 5.0 . Our shifters are made to shift better 50,000 miles from now. We even use anodized steel on all of the wearable parts that take the most abuse. We also use a highly porous Teflon material...
  11. L

    Hurst Shifter..."Notchamatic"

    Hey, I work for pro 5.0 and the reason why our shifter and Steedas shifters are more expensive is because our shifters are more expensive to make. We both use billet components through out. Our shifters are made to shift better 50,000 miles from now. We even use anodized steel on all of the...
  12. L

    Anyone drop a 6sp into their Stang yet?

    SWARR AUTO IS PUTTING THE 6 SPEED IN THE NEW CARS AND HE MAKES ALL OF THE PARTS TO DO IT. I think his name is Eric Swarr. phone # 610 489 4029 He installed my Tremec 600 into my 06 mustang and customised all of the parts for the install
  13. L

    What is the best short shifter for the 05-07 Mustangs??

    Hey I work for pro 5.0 and the reason why our shifter and Steedas shifters are more expensive is because our shifters are more expensive to make. We both use billet components through out. Our shifters are made to shift better 50,000 miles from now. We even use anodized steel on all of the...
  14. L

    opinions on shifter quality......

    I work for PRO 5.0 I have taken all of the shifters apart that are currently on the market. I have measured their tolerances, looked at their materials and tested all of them on the street and on the track at raceway park. Past years and the 05 car and the 07 car. I am willing to give an...
  15. L

    Husrt shifter installed, Like or Not?

    I work for Pro5.0 and when we make our shifter. we make it STIFF so that it can break in and still be tight and quiet in the future. We recommend about 1000 miles for break in but this varies depending on driving habits. Of coarse the shifter wont break in if you cruise at Hwy speeds in 5th...
  16. L

    Aftermarket shifter buzz?

    When these shifters are made all of the rubber is removed in order to make them shift positively. If you want a quieter shifter, then you want one that shifts worse. That is the trade off of aftermarket shifters and other aftermarket parts that improve the performance. If you want a quiet car...
  17. L

    What are the differences between the 5.4L and 4.6L short-blocks?

    The difference is .8L Haha ;) sorry couldn't resist
  18. L

    Loud Sloppy Clatter in 05 GT

    My car does the same thing and so does my roommates Mercury couger. But when I change gears to a numerically lower gear in my mustang and in her couger the noise goes away. It seems that all I have to do is down shift 1 gear and the noise immediately goes away. Try not coasting at that speed...
  19. L

    denso oxygen sensors?

    not side sensitive The Sensors are not side sensitive but in some brands the length of the pig tails are different only allowing you to place them on specific sides. Had no problems w/ Denso in the past. I usually sell Echlin to anyone who wants inexpensive part and they dont mind that it is...
Top Bottom
Back
Forums
Menu