Search results

You get a small K&N filter with a 1 1/2 or so mounting flange and put it on the BOV to keep things from going back into the intake and a 1 1/2 or so pipe cap from Home depot to put over the nipple on the intake. You will never get anything in the intake. And I have never heard of boost leak...

How many carbon fiber hoods have you owned? I have had three (one of my strange addictions) and each is around half the weight on the stock hood. Yes they seem to be carbon wrapped fiberglass but they don't have the bracing and seem to be half as thick as the factory unit.

My car has done this randomly since I got it 8 years ago. The slamming the door while depressing the switch trick has worked every time and still does. If anything it failed a lot more years ago and now barely ever does it.

Yes it is possible to make it work but honestly you should just find one that plugs in. Check ebay or your local craigslist. You should be able to get one for under 40 bucks no problem.

What happened to Epic? Does he still have his Mustangs?

Is it possible to re-clock a vortech V2? You should contact vortech and ask them. That means you rotate the intake side of the supercharger so that it points down behind the radiator instead of up so that you can run your piping down behind the radiator,around the bottom of the radiator...

Nice car! Looks like the Saleen spoiler.

A thermostat doesn't make your car run cooler. It only makes the minimum operating temp lower. It doesn't make your radiator more efficient. Once the thermostat opens it is up to the radiator to keep the temp as low as possible.

I use NGK plugs and change them every 10k. Now with 80k on the car and never had a blowout. I change them hot, cold and everything in between. I coat the valleys of the threads with anti-seize. Torque? Finger tighten them untill they bottom out then give them a nice crank down with a...

More details are needed like: What supercharger you are running... Did your supercharger previously fit with everything... How did you run your new piping... One idea you might use is to use prochargers routing of the piping. I believe you can download thier installation instruction from...

I don't know of any high flow cat/x-pipe combo's that are actually CA smog legal. I am pretty sure there aren't any. And the only smog legal short tube headers I know of are the JBA ones He probably had someone smog it who didn't care about the visual part of the inspection. Be prepared to...

I have 85k on my car. 52k of it with the supercharger @410 rwhp. Hundreds if not thousands of red line pulls and in no way is my tune safe. I beat on it like it needs to die. Completly stock internals.

Those look sic. can't wait for the pics.

Get some 31 spline chromo's for the stang and use the posi out of the Exploder because it is factory 31 spline.

http://www.harborfreight.com/12-electric-impact-wrench-68099.html Cheap and sure to break some day but it will help pull in the stud and will surely come in handy on a stuck bolt when you need it. I showed up at my friends house one day and he was doing his tubular k-member with a stack of...

If you have rebuilt it twice and it now needs another rebuild I would look at a possible oiling problem. Check to make sure your lines aren't clogged or anything. It would suck to put a new blower on there and ruin it too.

I don't think hitting the peice of rubber last week had anything to do with your tire being worn to the threads. Wear like that takes time to happen. If you don't mind doing the work go on Maximum Motorsports web site and download thier instruction to install the k-member. On there you will...

If you had lurked here before you couldn't have missed all the threads cause by people borrowing then wrecking someone elses car. Hopefully someone learns from this.

Maybe those cracks are why Maximum Motorsports recomends only 4 bolt caster camber plates on coil over setups. I wouldn't think there would be a problem just installing a new stud in the spindle as long as there isn't any play in the bearings. To fix the cracks you need to have a hole...

Come on man! One picture?