Search results

  1. R

    NEW WHEEL BEARINGS

    I went and got a quote to replace 1 side and it was $115 for the part and $95 for the labor Aprox. Please dont laugh but I went on line to price the wheel bearing and they were like $45-$50 but on my search I came accross the wheel bearing already pressed into the 5 lug hub assembly??? Is this...
  2. R

    NEW WHEEL BEARINGS

    the tires are new only a few months old and the bearing just started going so I'm pretty sure that they should be ok. WOW! 258ft lbs I hope my tq wrench goes that high. how difficult is this job to do for ones first time doing it? I'm no mechanic but I have done some other jobs ie;installed...
  3. R

    NEW WHEEL BEARINGS

    front left side..
  4. R

    NEW WHEEL BEARINGS

    :shrug:Is there a certain brand of wheel bearings that is better than stock or most aftermarket bearings? If so what brand should I use? Also should I change out the bearings in pairs or is it ok to do just the one that goes bad? thanks.
  5. R

    Mustang GT right hand drive

    hey the mstang looks pretty cool in right hand drive. i clicked on your link and i laughed right away a 96 gt w/150,000 km for $24,000 (LOL) they must smoke some good stuff over there. If you look at the picture of the inside of the car you can see the hood release is on the left hand side...
  6. R

    BUILD OR BUY

    :shrug:I'm condemplating building up my stock bottom end and maybe even my heads. I'd like to see what you guys think. I'm going to try to squeez out 600hp, how or what should i do to achieve this. I am already at the limit with my stock bottom end due to the high compression I'm running. I...
  7. R

    looking for the best intank fuel pump for my 98gt

    :shrug:hey guys, i'm looking to replace my stock in tank fuel pump and my in line boost pump for a solid reliable high flow intank fuel pump to work with my 98gt's returnless fuel system. Currently I'm running 42 lb injectors w/my supercharger running @ 11 lbs. I would prefer a quiet one if...
  8. R

    will this hurt my #'s

    LOL! it's the little things to watch for when reading other people's responses.
  9. R

    will this hurt my #'s

    i only picked these cams because i read an article in MMFF mag and they used the same cams w/ported heads Fast tune long tube headers not accessories with a pro charger @ 10 lbs and they used a stock bottom end and they put down over 600hp on their engine dyno. they werent recomending to run a...
  10. R

    will this hurt my #'s

    i just did a PI swap with comp cams and i'm wondering if these comp cams were the wrong choice to install? the cams are out 8 degrees due to VTP clearance i could of stuck with the stock PI cams but i'm not sure if i would of got more out of them due to degreeing them much closer than the 8...
  11. R

    help w/supercharger FORD SVT

    I know this is probobly a pretty dumb question but if i lose the supercharger and just run the pi swap with my cams would i be able to put more timing in and still be able to run 300hp @the wheels? i feel like i have this pos charger and it's realy not doing anything now that i went pi and...
  12. R

    help w/supercharger FORD SVT

    i just noticed your #'s how can you be making 325hp on your aode with just 7lbs of boost & PI cams??? you are right your car stock was probobly 180-190 rwhp i would guess that you'd be making somewhere in the mid 200's for hp. PI cams are probobly going to give you 15-20 hp max and your charger...
  13. R

    help w/supercharger FORD SVT

    well the whole thing was about finding out if it was a better unit than my current powerdyne but i have not seen anything supporting that it is in fact a better unit or even put out any more power. so i'll just save my pennies for the pro charger.
  14. R

    help w/supercharger FORD SVT

    WOW! I guess you did your homework. thanks for the info it was very valuable and informative. THANKS.
  15. R

    help w/supercharger FORD SVT

    YEP! Thats it! I realy havent heard much about this suppercharger excep 1 guy at a local car show trying to tell me that his ford supercharger (same as you had pictured) made him 150 rwhp w/a pulley change. it did not sound right to me but i know nothing about these chargers. what you have...
  16. R

    help w/supercharger FORD SVT

    it is a roost type built into the intake manifold. i don't have a link but i will try to get a picture.
  17. R

    help w/supercharger FORD SVT

    I'm looking at a Ford SVT supercharger for 96-04 but i'm not to sure of these as far as performance. So i'm wondering what these are good for as far as boost and durability. currently i'm running a powerdyne w/an 11 lb pulley but i'm at it's limits and i was told to look for something better...
  18. R

    seat problems

    Just got a set of Mach 1 seats for my 98 gt everything looks like it fits realy well in the car however the rear seat backs lock into position but do not waunt to unlock to fold the seat back down. Is there a way to adjust this? Also the power drivers seat has the 4 wire setup for the power...
  19. R

    need seat help

    :shrug:I just got a set of mach 1 seats for my 98gt the seat backs latch but do not like to unlatch to lay flat. Is there a secret to adjusting these to latch properly? I also need help with the wiring for the drivers power seat due to the plugs being different. any help would be awsome. all the...
  20. R

    crank or wheels????

    i'm only after 400rwhp but don't you think that it could be from the amount of compression i am now running 10,6,1 with the pi swap let alone they have cams and a blower i don't know how much compression i am running but it is pretty high especially for the stock block..
Top Bottom
Back
Forums
Menu