Search results

I replaced the motor from my 2003 3.8 V6 Automatic with a motor from a 2000 3.8 V6 Manual. I removed the pilot bearing and and transferred over the flex plate. The replacement motor (2000) has tons of vibration. I am about to replace the harmonic balancer but have read that they are different...

I just picked up a 2003 Convertible with a rod knocking. It is the 3.8 V6. I also have a good SBF 5.0 out of a 2000 explorer laying around that I was going to sale. I know the 5.0 will bolt right up to the transmission and will fit. I think I would have to change the exhaust, harness, and...

I am looking for caveats, pros, and cons of this swap. I have a 2000 Explorer with the 5.0 GT40P setup and 4R70W Transmission. I pulled the harness also. I also have the engine and transmission out of a 1995 E150 5.8L with the E4OD (Overdrive C6) Transmission. My Plan is to take the 5.8 and...

Has anyone used Rustoleum Rubberized undercoating. How well did it work?

I Built a rotisserie this weekend. I only have a couple of pics but here you go. I will add some better ones once I get a new battery for my camera. Please pardon the messy garage. Who really has time to clean anyway.

I Am getting ready to do the 13" Cobra Brake install on my 69. Does anyone have pics of the cobra brakes installed as well as the parts. I am doing the front only. The rear I am installing the 8.8 out of a 96 Cobra. so the conversion is rear end not brake.

Check this out! I saw it on another post and am wondering if anyone has done this on a mustang. If so I would like to see some pictures of it. My 69 is going to be a Daily driver in the summer only so I don't need a heater or ac. and I am thinking about doing this mod.

I picked up a 1979 302 (From an LTD) and would like to know what problems if any I will have just using it for the short block and putting all of my 85 gt stuff on it. The 85 GT 5.0 is roller cam with valve reliefs in the pistons. The 79 has good compression and runs good but has a 2bbl with a...

I am thinking about scrapping out the 88 Cougar I have and using the 3.8L V6 in my stang. But I am not sure if it is an easy swap or a royal PITA. Or possibly just using the AOD in place of my C3 that I have in the Mustang. The Mustang currently has a 2.3 L4 with the C3. I know I would have the...

My 2.3 blew the head gasket between cylinders 1and 2... I took the head in and had it shaved because it was also a little warped (Borderline to even need shaved). I got the time to put it all back together this weekend. No problem with reassembly except a missing exhaust manifold bolt. Plus no...

I aquired a 86 LX L4 C3 Stang that has a 1 BBL Carb on it. I have a 2BBL off of an older PINTO Yes I did say the bad word PINTO. So My question is what carb would be better. I am thinking the 2BBL for a better power curve (Like this motor actually has any Power) and possibly better economy. It...