Search results

  1. white99gt

    What is this?

    Mine has a rear disk conversion and my adjustable valve is in the same exact spot. That is where baer kits and SS brake corp say to install it..
  2. white99gt

    Air/fuel ideas

    Depends on the bolt ons..But 24lb injectors,65mm tbody, with a 90mm lmaf (but it will need a tune with this combo)..
  3. white99gt

    TRICK FLOW/GT40P COMBO?

    why just tfs? afr and eddy make some good heads too..I picked mine up for 600.00 ..I cant complain about the power they make.
  4. white99gt

    holley fuel pressure regulator

    If he needs one or his tuner needs one .ITS A TEMP FIX,if his tuner is suggesting he needs one ,HE IS A HACK tuner...Bumping up the fuel pressure by the regulator will be take out by the ecu after a few miles of driving it.. ANY stang that is tuned PROPERLY aka chip,doesnt need the fuel...
  5. white99gt

    holley fuel pressure regulator

    Yep,go back to the stock regulator..I adjustable regulator is a waste of money.No need for one.. I run a 255lph high pressure pump with a stock regulator with no issue.
  6. white99gt

    TKO-500 & TKO-600 users: how high in RPM can you shift?

    Yes it went from a 50/50 shot on 3rd to 9 out of 10(everyone misses 3rd sometimes). Tremec sent my 4 updated parts that fixed my issue(and still running the stock shifter).
  7. white99gt

    TKO-500 & TKO-600 users: how high in RPM can you shift?

    There has been a noted issue with shifting on the tko 500/600 series.. But there is a fix.All that is needed is to contact tremec tech line ,give them the id off the tranny.If its before a certain date(which unless it was made less than 6 months ago).They supply you with updated shift...
  8. white99gt

    New Parts for Xmas

    Stall talk to the converter maker ,see what they recommend.On average a 2500~3k should be fine with the stock cam setup.
  9. white99gt

    New Parts for Xmas

    Id go with the converter.Car will feel a lot better and get what power you have now to the ground better. Down the road get a explorer intake and have it ported,lot cheaper..It will work great with your heads..Ask me how iknow ;)..
  10. white99gt

    Piston swapping with out machining?

    Up to you. I personally drove mine (99) with a stock bolt on setup(2 years) while building the bad boy..Was hard to think about the power but the out come was well worth the wait. Plus why spend money two or three times.
  11. white99gt

    Piston swapping with out machining?

    I would have the bore checked.If you dont want to go that far.Leave everything alone and dont waste your money on a half ass rebuild and spend all the money on the real motor.
  12. white99gt

    MAC H-PIPE - no hangers???

    I have a bbk h pipe.I had to cut the hangers off to get it to fit right. That is why most do it.
  13. white99gt

    TRICK FLOW/GT40P COMBO?

    The combo will be better with a cobra/explorer intake ,throttle body is OK but a 70mm will be better because the tbody will be the same size as the intake opening(cobra/explorer). 30lb injectors are a good idea(if tuned) esp if you plan on a wet nos kit.24's are about perfect but they dont...
  14. white99gt

    Trick Flow Top End Kit user's, please step inside

    Mine was fms shorty headers into a o/r hpipe feeding a flowmaster catback . Stock air box into a 80mm lmaf then upgraded to a 90mm lmaf feeding a 76mm inlet pipe. Mine ran great besides a stall here or there. Not my car,just letting you know there is power on the table..On my own i seen a big...
  15. white99gt

    What clutch would u run.

    Yea originally had a alum flywheel till ,i had the ring gear come off of it(new ford 5.4 cobra alum flywheel)..Then i went back to my trusty billet steel.. For a street car the billet steel is a better choice.I seen the difference in the way the car drove.Power was the same but it just drove...
  16. white99gt

    Trick Flow Top End Kit user's, please step inside

    You know im going to have to disagree :nice: since i know what mine picked up..But like ive said before every car reacts different. There is a good 30+ horsepower left in the combo,esp with a higher flowing exhaust and tune..But its up to the OP what he wants to do.
  17. white99gt

    What clutch would u run.

    yes you can.But i always have run the billet steel flywheels.
  18. white99gt

    Trick Flow Top End Kit user's, please step inside

    The timing curves in the a9t could be something to look at. Personally , with the current mods i think you are where you should be. Figure 20+ rwhp with longtubes and highflow cats. 10+rwhp in the tune a few more if you open up the mass air meter(plus you wil gain better drivability with a ford...
  19. white99gt

    5.0 Resto Carpet Kit Question

    No holes but the carpet is pre stamped for the seatbelt and seat track holes(not cut out but the mat is "dimpled") to show you where to cut..
  20. white99gt

    Dyno tunning

    depends on what chip setup.. www.sctflash.com and www.diablosport.com they let you search my zip and state for tuners.