Search results

Finally got around to putting this shifter in. After forgetting the plastic guide my first time :bang: I got it in and running. The shifts are very short and positive. I can't imagine going back to the stocker after driving with the MGW. Some trivia about my shifter: I bought it used...

I thought this may be of interest to some of you 5.0 guys. This is what can be done when a car is detailed properly!! http://meguiarsonline.com/forums/thread/20421.aspx Enjoy, Matt

Hi guys: I took some pic's after this weekends detail. Just wash, clay and wax. Let me know what you think :D Clean Bullets :hail2: :hail2: Reflection :nice: I think it came out good!

They found someone

What causes this? I just had the fuel pump replaced with an after market stock style pump... Help! By the way the car runs just fine and has no drive ability problems at all. Thanks, Matt

I have an '03 GT 5 speed with about 40,000 miles. While shifting the revs, instead of falling smoothly seem to "blip" at about 1,500 or 2,000 rpms. It is almost like I tap the gas while the clutch is in. It makes the shifts less smooth and is quite annoying. No codes or check engine light...

Hi guys: I need some opinions. I currently have 3 cars: A Ranger pickup, a Mustang and a Volvo wagon (for the lady!). I only have 2 parking spots and as a result I need to sell either the truck or the mustang now! I can sell the mustang for about what I owe on the loan, I am upside down...

Yesterday I had a great mustang day. I saw a Hertz Shelby parked at one of my customers! 1 of a couple thousand made. Then on my way to see another customer I saw a PJ Edition Saleen down near the Saleen Factory! (Sounds Great!! 400hp/na ftw) 1 of 500 or so. I thought this was just...

Hello everyone: I just have a quick question: I just replaced the pads and had the rotors turned on my '03 gt. The rotors had never been off the car (the washers were still there) but were pulsing. I had them turned at a local machine shop and everything was fine for the first 300 miles...

So I used my jack last week and I didn't look at how it came out. Now I am to stoopid to figure out how it goes back in. I have an 03 gt... Help:owned: :bang:

I just removed all of the ghey neon lights that were installed in my mustang (by the previous owner). The only remaining evidence that they were installed is a whole drilled in the plastic part around the shifter. I want to get another one, but I can't find it anywhere. Any suggestions??

Just Practice? ? :shrug: I had a fun time with a '69ish mustang full of teenagers the other day. My wife made sure that we were ahead and "winning" the whole time. As we finished we ended with a series of thumbs up and proclamations of "Nice car"! This got me thinking. Is running another...

Hi guys: I have had a problem with pinging in my 03gt. I have started using 89 octane (California Gas:owned: ) and the problem is mostly gone. The car only pings at the top of third gear, at about 4,500 rpm's and up. :bang: Where do I start to get to the bottom of this? Plugs? Fuel...

Hi guys: I have a problem with popping and creaking coming from my steering at slow speeds. I expect this is a problem with the rack bushings? Is there something to do other than R&R the bushings? also, are there any tricks to doing this in the driveway? :shrug: Also, at full lock I get...

While I am a fan of purchasing lightly used cars (1-2 years old and low miles) I was surprised this weekend by quite a site. I knew my mustang had "underglow" lights when I bought it. :owned: I asked the dealer to remove any trace of the system. I expected all was fine until this weekend...

I just bought these bulbs from Autozone and they don't look right to me... Is the bulb the same for the headlights and the fog's or is it a different part number? Thanks as always for your help, Matt

Hi guys: I have an '01 ranger that is desperately needing a detail. I am have let this car decline for too long. :owned: It is parked outside 24 hours a day. The paint is oxidized (sp?) and has some staining. My plan this weekend is to bring the paint back. Here is what I have...

Hello everyone: I bought a pcv valve from the Dealer for my 2003 GT (36,000 miles). He said there are 2 options, a heated PCV and a standard. I bought the standard because it is about 1/4 the price. I assumed they were interchangable. I went home to change it and the outlet size is much...

Hi guys: I am going to the track for the first time in early December... (California Rules) ... My car is stock with the exception of a removed air silencer, K&N drop in, and CDC's side exhaust cat back. The car has about 35,000 miles on it. Is there anything specific that I should...