Search results

I just got all of that crap hooked up, but how in the world do you tuck all of that wiring back in there w/ the pms harness? And where did you mount you PMS box? Thanks, Will

I see all of you guys using this on wheels w/o a coating. Has anyone used it on wheels w/ a clearcoat? My wheels get pretty nasty sometimes and I get a little tired of cleaning them all the time. Just wanted to make sure it won't burn the clear. Thanks, Will

Heres a pic of the cluster I made. Not the best, but it'll work. See ya, WIll

Just wondering if you guys had to drill holes for your mechanical gauges to run through in the bulkhead. I looked real quick at my car, and didn't see any holes right away. Thanks, Will

Well, I finally got my Mustang put in the garage. My dad had filled it w/ crap since 1974 (I found a '63 four door galaxie at the bottom, lol) and its finally all gone. I came out smelling like a pile of piss, and it took me a few weeks, but I now have a place to store the car. I'll try and...

Ok, I just went out and hooked up my PMS for the first time. I went through the tables and zeroed everything, Part Throttle, WOT, made sure stand-along and boost was turned off, all that stuff. I think i got everything. Anyhow, i think everything is zeroed, so i saved it to all three...

I went to a reputable body shop to get an estimate on getting my hood painted top and bottom to match my car, and to repair a scratch on the front bumper. The quote they came up with was $1100!!!!!! I could hardly believe it. Anyhow, Im holding off and going to look around some more. I know...

I just picked up a used '04 PMS and was wondering what the easiest way to reset all the programs to zero would be? Do i have to go through and do it all manually, and then just save that empty program to the 3 program spots? Thanks, Will

Just wondering if anyone is currently doing this and what their tune is. I won't have a wideband for a little while so I just want to get a basic tune that will get me a little more fuel. I know it's a little lean probably the way it is, so any help would be good. Thanks, Will

OK, i've read that the pms has the ability to store 3 programs, but how do you switch between them? Also, can you revert back to the factory tune? Like on the tweecer you just twist the knob to off. Is there something like that for the pms? Just unplug it? Thanks, Will

Ok some of you may have seen my last post. I have the opportunity to buy an '04 series pms/3 bar map sensor for $600. My car will be boosted in the future. I wil also be getting a wideband to go along with either choice. My main question is, will i be able to get along w/o datalogging on...

Ok, i've been reading about both, and still wasn't decided until i found an '04 model pms w/ 3 bar map sensor that i can probably get for around $650 or so. And with the map sensor it will make it nice when im boosted down the road. So my question is, how much is the going rate for a used...

I just replaced my mach 460 w/ an aftermarket cd player, and now I have a hole in my dash where the 460 cd player was. Does anyone make an aftermarket gauge pod that fits in this location? Or has anyone modified another pod to fit there? I know they make clock pods and such, but I think a pod...

I've noticed some of you have a tubular front end, control arms, and coil overs and I was wondering how it is on the street. Has anyone had any problems w/ the welds or tubing cracking/breaking? How is the ride w/ coilovers compared to spring/strut? I've been looking at the aje racing pieces...

Well, I shoulda know better. After putting my trickflow heads/roller rockers on, I now get a clatter out of #8 once the engine warms up. I know the rockers aren't loose, so a lifter must be crapping out. Anyone had this problem? Also, what is a good replacement to get that can take the...

I just bought a kaenan heat extractor hood, and it looks like im gonna have to slot the hinges a little, and possibly move the hood latch over. Just wondered what some of you guys have ran into when fitting an aftermarket hood, and if you have any hints in doing it. Thanks, Will

I've been searching, and can't seem to find a positive answer. For my '94 will I need the metra 70-5514 harness? Is that the only extra thing I will need? This is the most complicated stock system ever, lol. Thanks for any help, Will

Since i've bought my GT you can see the additions i've made to it in my signature. Currently the only fuel system mod is a 255 in-tank. The next step for the car is going to be a man-o-war 331, same heads/intake and either a blower kit, or im going to build a turbo kit. It's going to be...

Im in the process of putting the 3.73's in my car at work. I ran the times in my sig w/ the 3.08's, which still isn't the best, cause of the 60'. I know im gonna have worse traction problems, but i have a set of slicks to help w/ it. Just wondered if anyone had any realworld experience on how...

Hi all, i posted a message awhile ago saying to reset the idle. I did that, and it is back to its old self. Lol. Ok, I get a random idle surge, then it dies. It doesnt matter hot or cold, and it doesnt do it all the time. Also, when its cold, and you start driving, it surges a little too...