Search results

  1. G

    fiberglass hoods

    Were you happy with the stangaholics hood?
  2. G

    modding shock towers

    Go with a MII front suspension. You'll have all the room in the world.
  3. G

    Filling up gas is a pain

    If it's coming out when you're filling it, you'll need to pump slower like dcstang67 said. After it's done pumping shake it while you pull it up, then tilt the nozzle up as you pull it out. If you tilt the nozzle all the way back any leftover gas will go back down the tube as opposed to on...
  4. G

    Engine Trouble

    I wouldn't recommend bondoing rust damage...
  5. G

    Suspension 68 Fastback

    Mustang II Heidts Hot Rod Shop - Custom Suspension Systems
  6. G

    My Fastback *Update*

    The stock hood hinges will work with your flattened inner fender panels?
  7. G

    My Fastback *Update*

    How are you attaching the hood?
  8. G

    Electronic Fuel Pump

    Just curious, but why do you need an electric fuel pump?
  9. G

    have you seen this motor- stang before?

    They're really, really bored.
  10. G

    Fiberglass Fenders

    http://forums.stangnet.com/656858-1965-fastback-project-2.html
  11. G

    Fiberglass Fenders

    lol beat me by a few seconds.
  12. G

    Fiberglass Fenders

    I bet it's 10 lbs max.
  13. G

    Need suggestion on Hole in block... is it okay?

    What year is your block? I have a late model truck (94-97) roller block and it has a hole in the exact same location.
  14. G

    '64-66 Drivers Side Fender

    I could use it, but I'm all the way over in Missouri...
  15. G

    Pushrod Length

    I figured it out Thanks for all the help guys. The problem was: When I put the rocker on, I took it right out of the box and put it on the rocker stud without noticing that the trunnion was upside down. You wouldn't think this to be that big of a problem, but the hole is actually offset on...
  16. G

    Pushrod Length

    Comp Cams says that the roller should start at the intake side of the valve stem and then roll to the exhaust as the lift increases. My roller never gets past the intake side. http://www.compcams.com/Technical/FAQ/ValvetrainGeometry.asp Has no one else ran AFR 205cc heads with pro...
  17. G

    Pushrod Length

    Why do I need to install a head gasket if I know the compressed thickness? All I need to do is add .041" to the pushrod length. When you say just a little to the inside of the tip do you mean the intake side of the valve stem close to the center? If so, the method that you are describing is...
  18. G

    Pushrod Length

    I am confused on what you're trying to say here.
  19. G

    Pushrod Length

    That's the first thing I checked in to. The AFR 205cc heads use 7/16" rocker studs which come as long as you can get.
  20. G

    Pushrod Length

    Yeah I realize that. I have a fel pro head gasket with a .041" compressed thickness, but I don't want to ruin the gasket while I'm taking the head on and off.
Top Bottom
Back
Forums
Menu