Search results

My legit 99, 35th anniversary mustang in torch red. I've owned this car for 16 years and believe that I'm the second owner. The car has 84K miles on it KB supercharger 03 Cobra IRS aluminum SPEC flywheel and king cobra clutch Steeda subframe connectors, shifter and springs Tokico shocks Cobra...

My legit 99, 35th anniversary mustang in torch red. I've owned this car for 16 years and believe that I'm the second owner. The car has 84K miles on it KB supercharger 03 Cobra IRS aluminum SPEC flywheel and king cobra clutch Steeda subframe connectors, shifter and springs Tokico shocks Cobra...

I am able to use the stock headers (creatively re-contoured) with my Gt40 heads but I would like to go to some long tubes, since plug clearance is a PITA with these heads what would you recommend?

Ok I was influenced by a couple of threads requesting small apaerance mods so here's a fast and dirty one. I located a sign shop and purchased some carbon fiber wrap. Removed the rear wing from my 99 and unbolted the struts. Also found a small stress crack in the trunk from the wing...

a set of 6 10th anniversary wheels and tires. 4 17x9.5 with Hankook 275/40/17 road race slicks on them, rims have some minor rubs on a couple of them. 2 17x 10 with Sumitoma HTR 315/z35/17 tires on them. These wheels and tires are essentially brand new, 50 miles, no rubs and the tires still...

My old autocross car, decent body, many extras including an 8.8 , 3.73 limited slip, and suspension mods. Please see link for pics and details. $2100.00 813 382 0271 (Florida) http://www.tamparacing.com/forums/ford-tech-sale/786804-decent-sn95-sale.html

Is changing over to 5 lug legal? or do I have to stay witht he little front disc brakes and the drum rears? The rules don't seem extremely specific on the issue. thanks - Rob

I just did this swap, it was very straightforward. Here's the link: http://www.tamparacing.com/forums/ford-tech/483394-new-edge-rearend-swap-irs-stick-axle.html

93 Fox What's the widest tires I can place under the stock sheet metal. I need to know tire size, BUT MORE importantly, wheel size including backspacing front and rear-Thanks

I have a stock 2.3 (1993) with the double plug head. I was wanting to use this engine as a "mule" to sort out my car. Would any of you know how much I could shave off that head to get 11.5 compression, and suggest a cam. I just need enough power to be competitive, the killer motor is a year away.

When I lowerred my 99 I (eventually) added 2 more mods, one was the bumpsteer kit, and the other was the extended front ball joint (both from Steeda) the reason for this is that when lowerred, the roll center of the car ends up below pavement level. Believe me, those 2 mods were WELL worth the...

You guys can tell me how full of crap I am. 93 mustang notch 2.3, 5 speed, 7.5 rearend budget .50 cents I have lying around misc parts from a 99 gt that might be used. 1. Springs -99Gt with cut coils 2. rear sway bar -99gt 3. front sway bar- either from a GT or maybe a Fairmont wagon...

I'm going to build an 89 (I think) 2.3 for the local autocross track, I know that is an odd setup, but there are some Miatas that I need to get even with. It has to be "stock", let me explain that one. "Stock" in this case, means the parts have to be stock, the car can be stripped (including...

So I took your guys advice with the white 35th anny that I bought at mustangs & mustangs. **the sandpaper is made by a company called K&S, and is a film, the 600 is more like 1500 grit** 1. Dissasemble it (if you do this there is a screw under the trans, pop the trans off first to access it)...

Traffic calming (speed bumps) are a PITA for most of us car guys. I have located an interesting link that will assist you, and your neighbors in arguing against these things. Please use at will and good luck. http://www.secondscount.org/

has anybody weighed their 99-04 GT? I was trying to get and idea of the actual vehicle weight (not shipping weight). If you did, did you also happen to get the front to rear weights as well? Thanks.

OK, here's the deal, The local autocross club changed the rules that basically obsoleted my car for this year. I ran 3rd in points last year even running against S2000's and supercharged, race engineered (modded up to my class) miatas. I recently received ownership (free) of a beater 89 LX...

So a buddy of mine shows up at mustang & mustangs (ford & north american) and locates a 35 anny key chain for $7 bucks. Then, this guys goes intothis ancient hobby shop a few weeks later and finds a white 35 anny coupe in 1:18 for....$29bucks. I would really like the red version, so if any of...

I would like to buy an aluminum flywheel but I don't know if my car has a 6 or 8 bolt pattern. (the engine date is April 8, 1999) Also, is the Cobra flywheel lighter than the GT and is that interchangeable? The reason I ask is that I would like to order the parts ahead of time and knock it out...

Some of you guys have talked about changing rearend gears, I found this and thought it might help. http://reiderracing.com/rtech_engineRPM.htm and.. http://reiderracing.com/rtech_tiredia.htm if I locate any more I'll put it in here. n/a vs forced induction calculator...