Search results

  1. 9

    Coilover options

    some eibach coilovers from summit: Eibach 3510.710 - Eibach Pro-Street Coil-Over Kits - Overview - SummitRacing.com anyone try these?
  2. 9

    Coilover options

    Im looking for a good set of coilovers (front and rear). Im thinking about ordering some MM, but wanted to see what everyone thought first or if someone had some different recommendations B4 I drop $1700. Has anyone heard of "NEX" coilover? saw a set on ebay for about $760ish Thanks for...
  3. 9

    help chosing an oil pan

    Im looking at the deep sump S/S or the "T" sump RR Canton oil pans, but not sure which one to get. This is going on a street car that will see the track. What are you all running on your cars Thanks for your replies
  4. 9

    Saleen/ Alcon calipers ?

    thanks, thats what i was thinkin since they came with 18's new
  5. 9

    Saleen/ Alcon calipers ?

    there is a set of Saleen/ Alcon calipers up for bid on ebay off of a 94 Stang. My question is what size rotors have to be used 13" or 14" and if only a certain type will work? (like a certain brand etc) Will they clear 17" wheels and how much are they worth? Thanks!
  6. 9

    17x10 wheel Q?

    Thanks I have the Mark VII rotors right now but plan on installing SN95 spindles very soon, as for the rear i have some moser 31 splines for a 79-93. Im just trying to go with something different b/c I keep seeing the same wheels on every other mustang
  7. 9

    17x10 wheel Q?

    Im looking to get a set of 5zigen FN01R-C lightweight wheels I want 17x10 in the rear -- they offer a +12 and +25 offsets, +12(about 6" BS) and +25(about 6.5" BS) -- which one would fit/ look better in the rear? For the front its either 17x8 or 17x9 -- For 17x8 -- they offer +25(...
  8. 9

    calculating compression

    how do i calculate the compression with a 60cc head? Compression with a 58cc head is advertised at 10.4:1, 9.7 w/ 64cc head
  9. 9

    i have 1.6 and 1.7 RR's, which ones should i run with my setup?

    Ive heard bad stuff about Proform parts, so i will say the Crane/Ford rockers
  10. 9

    Main bearing problems??

    yeah i checked plastigauge-it was 0.015 torqued at 70 lbs yeah the guy at the shop line bored them too, but im gonna gonna call or go by and talk to him to make sure
  11. 9

    Main bearing problems??

    ok Im in need of some help with my motor, i got the block and rotating assembly back from the machine shop and began assembly, now heres the problem, after getting all the main bearings in and the thrust in the center and torquing all the mains down , the crank wont turn at all (everything is...
  12. 9

    302 worth it?

    is $200 too much for a 302 out of an 85 LTD? or could i get one cheaper at the junk yard? thanks for any replys
  13. 9

    vibration problem solved!!

    ok so ive posted on here a time or two about a really bad vibration problem starting at about 65-70mph and up, i went through and replaced part after part, and one of the 1st things was the DS, took it to a driveshaft shop and had them retube and balance it, put it back in the car and the...
  14. 9

    edelbrock heads

    thanx 90-red-lx, thats kinda what i was thinkin, just wanted to get it straight tho.
  15. 9

    edelbrock heads

    does anyone know what makes the performer RPM heads non-emissions and performer heads emissions? and do the RPMs put out more power over the performers??
  16. 9

    engine build recommendations

    im lookin at doin a build in the near future, a 306 possibly a lil bigger with edelbrock performer rpm heads 2.02/1.60 with the edlebrock rpm 2 intake and a 70mm tb, im not sure what type came tho. i want a somewhat rougher idle. my goal is 400rwhp that is for the most part a daily driver. is...
  17. 9

    PLEASE HELP! BAD VIBRATION!

    the motor and tranny mounts are new too
  18. 9

    PLEASE HELP! BAD VIBRATION!

    could the vibration be coming from the clutch assembly? it has an aftermarket clutch, i dont know what kind tho, it was also in the when i bought it???
  19. 9

    PLEASE HELP! BAD VIBRATION!

    yeah its only speed related not rpm, the wheels & tires are balanced, and it does get worse the faster you go. how would i be able to check the tailshaft bushing etc.?
  20. 9

    PLEASE HELP! BAD VIBRATION!

    yeah it does, it can with 3:73 gears. why do i need an aluminum DS??
Top Bottom
Back
Forums
Menu