Search results

i just swapped out my motor to a romeo from a windsor and i need valve covers. id like some from ford racing that say ford racing or powered by ford or a logo or something but i cant find anything for my motor. thanks for the help.

i supercharged my motor and blew it so iam rebuilding the entire motor and have some questions. first will a 7 qt oil pan fit without any problems? im wanting to make at least 500rwhp and i dont know what kind of fuel system to run. right now im running a svt focus pump and 42# injectors. can i...

so i got a suicide tune from the dyno that tuned my mustang. after having some tests run on the car i found that i have valve damage and low compression on some cylinders. so im planning on pulling the motor and having it built from the bottom up. so what i need to know is what internals i need...

so i have a vortech v2 SQ supercharger installed on my car. it made 320 hp to the wheels at the dyno which i thought was a little low. the day i got it back i was takin a friend for a ride and after i dropped him off and went home the stang was acting really weird. it wasnt idling like it...

hey guys, i have a 00 GT and it needs new suspension. for some reason the car sits higher on the drivers side than it does the passenger and it looks really bad. im wanting to lower the car and increase handling at the same time. i also want to do something to improve traction in the back. im...

i bought a focus fuel pump for my 00 GT and went to have it put in and the shop said that it didnt fit. i read on here that this pump would fit and even got a link to buy it. where did i go wrong. how could it not fit right?

has anyone used a NEX kit for their mustang? let me know how it worked for you.

i need pictures of a white 00GT with one or two black stripes. thanks for the help guys.

i bought a prochamber that fits a 98 model mustang. i have a 00. before i bought it i contacted MAC to see if they were compatible. they told me that the only difference in the two is that the 98 model had hangers and the newer ones didnt, so as long as i cut off the hangers i shouldnt have any...

i have an 00gt. im about to get new rims. i want to get 9" on the front and 10/10.5" on the back. will i have a problem with the backs fitting. will deepdish rims rub in the back if i decided to go with them. also what would be the best tires to put on the back. Thanks

i have an 00 GT with 40 series flowmasters. i want to put x pipe on it but im not sure which brand to go with or if i should go with h pipe. i dont have emmisions here in SC so im looking for catless pipe. can anyone give me sound clips of stock headers 40 series and different types of o/r x or...

ive been looking to buy a sct xcal 2 tuner for my mustang. some of the items i have found on ebay say that it isnt new but it is unlocked and can now hold new tunes for another car. is this possible.

im wanting to upgrade the throttle body in my 00 GT. im guessing that i need to upgrade the MAF sensor as well. what size MAF and throttle body should i get? do i need larger injectors as well? how does the MAF calibration work with the injectors? Thanks

i have a 00 GT with a 373 rear end pulleys cai and 40series flowmasters. soon to have new x pipe and a sct programmer... a friend that i havent seen in a while has built a crx that is sprayed and pushin 20psi of boost...what kinda race am i looking at here...am i going to get blown outa the...

i just had a 3.73 gear installed in my 00 GT. it threw my speedometer off by about 10 mph. the garage that did it said there was no speedo gear to replace. they said that it was electronic and that i needed to find the codes online to reset the speedo....like turning the ignition on and off...

i was wondering if anyone knows about using rotors and calipers off of a different car on a 2000 GT. Im dirt poor and need a better brake system. eventually i might get something better. so if any one has any ideas about calipers from an expedition or f150. i just need calipers that will fit...