Search results

  1. P

    Upgrade OEM LSD with FRPP M-4700-C Carbon Pack?

    Could you explain a little more about the +1 clutch. I'm due for new clutches and as long as everything is opened might as well do all that's possible for traction. I do lapping during the season and would like to get as much traction as possible exiting corners. Thanks
  2. P

    How to modify for Road Racing

    Hi, I was wondering what should the tire pressure be for lapping. I have Nitto Invo tires and cold tire pressure is at 35 and after a 20 minutes session it's up to 41. Should it be different? Also I just installed Tokico D-Spec and would like to know what would be a good starting point for...
  3. P

    How to modify for Road Racing

    Stage 2: My Own Stimulus Package Custom Pedals Sanctus, Could you give me more details on your custom pedals? Are they modified for heel toe? I started road racing and although you can heel toe on the car, better positioning would make it easier. Thanks
  4. P

    Blue CAI oils

    You can get the blue oil from here S&B Filters: Filter Maintenance. I've got the Steeda setup and also wanted to keep the original blue color. Works great. However I'm not sure if staining blue over red will come out right. :shrug:
  5. P

    Disassembly of Rear Calipers

    MustangDave, I knew that but was unsure about what would happen when I remove the clip. It seemed like it was holding down the parking brake spring loaded assembly. I was afraid that once that clip is removed, the assembly would fly out with the spring pressure. Well I figured that at this...
  6. P

    Disassembly of Rear Calipers

    Hi, I'm in the process of removing all 4 calipers to get them powder coated. Once removed from the car (easy part) I have to strip them completely (because of the heat in the chamber for curing the powder paint). The front calipers are straight forward, however the rear calipers are a...
  7. P

    3V Spark plug change hell

    Well before leaving for work this morning I decided to look at the plugs one more time (thanks highvolts for the motivation) and verify if too much antiseize had creaped close by the electrodes. What i have found is that the first plug passenger side had the procelin cracked in 2 places above...
  8. P

    3V Spark plug change hell

    Hi all, Well I decided to check my plugs after 25000 Km. They came out without hesitation, there is minimal carbon buildup. I put a little of the nickel anti seize and screw them back in. The problem now is that the engine has a rough idle and hesitates when accelerating upto approx. 2K rpm...
Top Bottom
Back
Forums
Menu