Search results

I have dis-assembled my steering componets and need to really get them cleaned. Has anyone had any luck with a certain type of parts cleaner or a method/ process? I believe they will need to soak for a while or even overnight. I have scraped off as much as I could. Thanks for the help

Not sure if anyone else out there has the headache of picking a paint color like me, and not sure what color you want. Sure its easy to walk into a dealer and you only have 6 colors to pick from on newer models, but when you go to paint your Mustang and every color is available - it can be...

Ok, I need some help on getting my front coil springs in my 67 installed. I went with a grab-a-track front end and finally am putting the parts all on. (I wasnt the one who removed the old parts). Went and rented the external spring compressors and didnt seem to matter where I placed the...

Purchased a Grab-a-Track front and rear suspension kit for my 67. The last shop that I had it at put the rear on, but not the front. The kit did not come with any mounting hardware for upper/lower control arms to the body/frame. The suspension is with me, the car is 100 miles away at a media...

My 67 just went through a media blaster down to bare metal on the interior, trunk, engine bay areas. I wanted to lay down a DIY paint or sealer that I dont have to worry too much about it bubbling/ cracking over the years and retaining moisture under the carpet. I thought about a truck bed...

My 302 came out of a 86 Lincoln, with a rear sump pan, but my 67 that its going in is a front sump pan. What year/ make/ model can I give the guy at the auto parts shop for a front sump screen and pick up tube that will work? Thanks.

Got a 347. Specs: 302 bored .030 Forged bottom end X303 cam Worked 351W heades (larger int/ exh) Dual plane intake Holley 750 double pump C4 auto w/ 3000 stall I have not installed this engine yet as I am deployed and the car is at the paint shop. I ran into an interesting...

Ok this is a two fold question. 1. I have a 302 block out of a 86 Lincoln going into my 67 coupe upon return from Iraq. Honelstly I cannot remember, but do I need a front sump or rear sump oil pan? (manual steering) 2. Has anyone out there done a carb to fuel injection conversion where...

Got a 67 Coupe, looking for replacement rear seat foam, any ideas?

I ordered a brake conv. kit for my 67 coupe. The company asked me if it has manual or power brakes, at this point its just a rolling shell and thats the way I bought it so I dont know what it came with. Here is the VIN break down if that helps: 1967 Metuchen, NJ Hard Top 289 (2V) #...

Ok, so the car went off to the body shop today, will share pics as I get them. When done, my 67 will not have a heater or A/C on purpose. And where the controls go, will be an empty space unless I have the body shop just put a panel over it. Was wondering if anyone out there has seen or has...

I am trying to find a site that shows different paint colors to help better choose one before my car goes to the shop, but keep coming up with pay sites or nothing at all. Does anyone out there know of a site that will show different colors and possible paint codes? Thanks.

What is the difference between a standard eye leaf spring, mid eye and reverse? What is a good leaf spring for a daily driver 4, 4 1/2 or 5 leaf? Thanks

I have been looking at sub frame connectors and have a few questions. 1. Is round (tube) better than square tubing? 2. Is it better to have them installed with the engine in the vehicle? I once saw a episode of hot rod TV and it showed installation of them with the engine in and the car on...

Hey everyone, stumbled across this while wasting time on the internet. Maybe it will help someone out there in a resto when the law comes into play on how to approach the DMV with your car. http://www.crankshaftcoalition.com/wiki/How_to_title_a_hot_rod

Will a X pipe set up from a Fox Body from the headers to mufflers work in a 67 coupe or is it too much work?

For anyone out there that has been to this point, please help. I am looking at replacing the worn OEM suspension for the front/ rear end of my 67 coupe. I have seen in magazines kits like Grab-a-Trak that run about $500 for new leafs, springs, shackles, shocks, sway bar, end links and bushings...

Has anyone out there ever come across aluminum trim for bumpers, window trim or door handles? I like the look, it matches my rims but I cannot seem to find an aluminum or brushed aluminum bumper to save my life, not to mention door handles. I dont even know if aluminum bumpers are legal or...

I am at that point in my resto where I have to replace the wiring harness. I only plan on running the following: Headlights Taillights 2 ea cooling fans Holley Blue fuel pump radio w/ stock speakers Windshield Wipers Remote Trunk Alarm Interior Light Possible Electric Windows I...

Ok so im sure im not the first to realize that on a 67 dash I need one more hole to complete the oil, temp, volt, gas, rpm, spedo combiniation. I dont want a pillar pod, or a single pod on the dash. Has anyone out there had success with transplanting a 66 gauge cluster into a 67 or making...