Search results

I recently bought a complete 97 Cobra rear end and it has no brake lines on it. So what I need to know is: 1. How hard is it to bend my own brake lines? 2. How do I attach the brake lines to it? Joe

My car is a 93 LX 5.0, 5 speed hatch. I am in the process of installing MM CC plates on my car along with Tokico blues, Bullitt springs and poly ISO's. I am confused about the spacers. With the Bullitt springs should I go with 1 small spacer on top with 1 small spacer and 2 large spacers on...

2001 Bullitt shocks, quads and struts with approx 30k miles for $60. Will these be a direct bolt on to my 93, retaining the 170,000 stock springs? The reason I ask is because my car rides terrible now and I am looking for a cost effective solution until I am ready to install my suspension upgrades.

Now that I have calipers I have been looking into my next purchase to do the 5 lug conversion on my 93. I came across the Ford Racing M-2300-M kit for the rear. This would require me to run SN rear axles. I wondered how many of you are using SN length axles and how many of you are using Fox...

What is a reasonable price for used Flo-fit seats? I saw this on ad and wanted some other opinions. Parting out 1991 Mustang Vert

September was a really good month for me as I came across the following items for sale and purchased them. 1. NIB loaded 10th anniversary Cobra front and rear calipers. 2. Tokico blues with 0 miles from a roller being built. Maybe living in DFW isn't so bad. :D

After reading allot of different opinions about springs on here i decided to go with the "Bullitt" springs on my 93 LX. Thanks to Stang & 2 birds I had the correct part numbers to go into my local ford dealer parts guy with. He was able to order them for me. I though the price was a little...

I was on my way to a charity car show that my Mom mentioned to me in my 93 LX. I pass a Tahoe and turn right and I notice in the rear view mirror that the Tahoe followed me around the corner cutting two lanes to do it. I am thinking this is just a typical Texas driver on the phone or something...

A few months ago my club had a dyno day. I took my 93 LX 5.0 5-speed. Run 1 was: 193.02 HP & 264.91 TQ Run 2 was: 192.56 HP & 268.20 TQ Now before you start ROTFLYAO see my details.... Details on the car: Bought it new and now has 169,000 miles on it. Remover air silencer, K&N panel...

Do any of you guys know what the numbers are on your stock spring tags? I have been looking for some used ones for my 93 and have no way to verify if what the seller is telling me is correct. Thanks

With $1000 dollars to spend what would be the best upgrades for an 05 GT?

Last Tuesday I sold the 86 t-top GT. It was sad to watch it drive away. I know it did go to someone who will take care of it and make it better. I just came to the decision that I had too many cars. I didn't want to be one of those people who will get around to it. I know some of you will not...

I bought my 93 LX 5.0 I have brand new. In 1996 it was hit down the left side and pushed into a pole. Both doors and the drivers side fender were replaced. The drivers side 1/4 panel was straightened. it was not fixed correctly as the gap between the fender and door on the drivers side is...

I was just wondering if someone could define the term "project car" for me.

I think that i am suffering from MBS (mustang buying syndrome). I recently bought an 88 gt t-top 5.0 auto. This makes three mustangs and my DD altima. It is a complete car. It will start if you spray carb cleaner in the throttle body. It smokes like a mosquito fogger when running. I don't...

just trying to figure out how to post a picture

When I replaced the t-5 in my 93 this last time i had to cut a 1" section out of the smog tube that connects to the h-pipe due to the connection being welded on a previous replacement. I have read that you can use a high temp rubber hose and clamps to re-join the two but have not been able...

I recently found that there is a hole in one of my stock mufflers and that the flow tube on the same muffler is about half way separated too. i was planning on leaving the stock exhaust on this car, but I really have no choice now. The car is in storage right now in Colorado and is only...

Recently I replaced the heater core in the 86. I had the dash completely out of the car. When I got everything back together the fuel gauge did not work. It did work when I took it apart. I did find one loose wire that splits from the harness on the passenger side next to the heater assembly. I...

So, the tilt steering column in the 86 is a little loose. It moves back and forth at least 1/2" How much of a pain is this to take apart to fix? :shrug: