Search results

  1. D

    Procharger P1sc Vs. Kb 2.1

    I am one of the few people out there that have run both a Vortech S-trim and now a KB 2.1. To me there is no comparison. The KB makes the car much more fun to drive on the street. There just isn't any comparison to my old S-trim. The centri was to on or off for me where the KB is always there...
  2. D

    I Want To Build My 2v! Help!

    Sorry bro but I have to disagree with you on this one. I don't think your compression ratio has anything to do with your car being a slug in lower RPM's. Last I checked the compresson ratio on an 03 cobra was only 8.5. I think your problem is your stage 3 cams. They are costing you some serious...
  3. D

    Why Do Import Guys Give No Respect Towards Mustangs???

    I think its ignorance and the mentality of the people who buy those cars. I am talking about Civics, Accords and so on. 350/370z, supra, evo, and the like owners are completely different. All the people I run into that have Civics and the like seem to be young punk kids. I remember the last...
  4. D

    Screw In Intake Temp Sensor

    Don't worry about it. It doesn't matter what way it's wired and the computer doesn't care what one is there.
  5. D

    My Kenne Bell needs a rebuild: Recommendations?

    Really? Care to enlighten us as to how the air moves THROUGH the rotors since they sit in an oil bath? Sorry but this couldn't be further from the truth or wrong. The bearings sit in oil as do the gears. There are ports in the blower case that allow the oil to flow to the back of the blower to...
  6. D

    281 to a 302 stroker

    Dont waste your money on a stroker kit. If you do a lot of reading on the subject they really don't off a lot of extra HP due to the small cylinder bore ford cursed us with. When you add the additional cost of the kit its really not worth the money.
  7. D

    Geting Butt Kicked By Z28!?

    If you want to beat up on LS1 camaros get yourself some forced induction and dont look back. Make sure it has a good tune from someone who knows what they are doing and you will never have to worry about ending up with a window in your block. The LS series of engines is bad ass but they are...
  8. D

    Oil Cooler question with intercooler and supercharger

    No problem. There are more then a few oil coolers out there that will fit in that area and sourcing a fan from spal wont be hard either. Make you you have a thermostat on there too. I say this because cold oil can do its fair share of damage and shorten the life of your engine.
  9. D

    Oil Cooler question with intercooler and supercharger

    You will most likely see an increas in IAT's by putting the oil cooler in front of the supercharger intercooler. If I were you I would get an oil cooler that is compact enough to fit in the drivers side fender and add a fan to it.
  10. D

    Mustang Leans to left...Suspension?

    Look at your lower control arm bushings, strut mounts and your springs. Those are the only things that would cuase something like that. I would bet that either your strut mounts are blown out or one of your springs is sagging.
  11. D

    Cobra Killer Supercharger

    Get yourself a centri blower with a FMIC and call it a day. Keep an eye on your IAT's and make sure you get a SAFE tune.
  12. D

    suspension questions

    As I tell just about everyone get yourself an MM starter box if you want the car to handle well. You can go with the tokico illumina kit if you want some adjustabilty. Most people that buy adjustable struts/shocks seldom adjust them though. The difference between cheap lowers and the more...
  13. D

    I need some advice on shocks and springs

    MM starter box and call it a day.
  14. D

    Decided to keep the 2v :)

    Get the blower and don't look back. You will get more enjoyment out of it then any of the other mods you listed. If you are smart about it you can do a complete vortech/FMIC setup on the cheap and make over 400 at the wheels no sweat.
  15. D

    Rotor Removal Help

    How long is the breaker bar you are using? Have you tried a cheater pipe?
  16. D

    Notching Bilsteins for Coilovers

    This. One exception however is that I believe if you bought your rear shocks from MM they will cut the snap ring groove for free all you have to pay is shipping.
  17. D

    Saleen supercharger problem

    Check all your vac lines and I would take the belt off the blower and spin it by hand to see if it spins freely.
  18. D

    97 GT Supercharger ?

    Yes, FMIC stands for Front Mount InterCooler. Honestly I wouldn't bother with doing the PI intake right now. I say this because unless you plan on using adapter plates you will run the risk of ending up with a leak because the intake is not designed for those heads and will require a lot of...
  19. D

    97 GT Supercharger ?

    Incorrect. The heads and intake have NOTHING to do with getting the vortec to work. To the OP all you need is the specific brackets and little odds and ends to make the vortech work on your car. The most expensive parts will most likely be the regulator and the bracket that mounts the blower...
  20. D

    Calling all track guys for suspension advice.

    For $1100 you will most likely be getting something like UPR or GMS. If I had to choose between the two for any kind of cornering I would actually go with GMS. If you are serious about racing go MM and don't look back. I would get yourself a starter box from MM and call it a day. The kit comes...
Top Bottom
Back
Forums
Menu