Search results

  1. spyder7724

    12.41 @ 109.35 N/A Auto New Best

    Nice now just ditch the passenger seat/spare tire and get a p/s delete belt and you'll be damn close to 11's
  2. spyder7724

    driveshaft ?

    They are a very good product IMO.:nice:
  3. spyder7724

    drive shaft

    where in MD are you located. I'm between Baltimore and Frederick. If you are close to either call and we'll figure out a way to save you the shipping and stuff. + for installs and tuning you can try JJ @ Woodbine Motorsports. Justin (JPC) sends people to him also for SCT tuning...
  4. spyder7724

    meizrie electric water pump

    I've had mine on for almost 2 years and 13k miles. I run it a lot at the track to cool down and never had any problems on the street. As much racing as I do it's probably equivalent to 50k miles of normal driving. the pump runs almost constantly during eliminations which can be hours if I'm...
  5. spyder7724

    Ram Air Hood or Cold Air

    the CAI's do require a retune for most and my ram air hood didn't line up with my CAI so it had to be "adjusted" :) I really don't know how much the ram air is worth but once i got the CAI sealed up to the outlet on the hood i did pickup about 3 mph in the 1/4mile. I've data logged IAT's and...
  6. spyder7724

    Low Cost Mods...

    as long as you are using the stock length belt now it will be approx. 88" I actually run an 85" with my combo of fluidamper lower pulley and mezeire e-w/p but almost everyone uses the stock length belt other than me. I've got a couple of the short belts. I don't make much off them I just did...
  7. spyder7724

    Low Cost Mods...

    You have to budget in some fun mods or else you might start to lose interest. for me it's stuff like: autometer gauge pod, rear honeycomb panel, aerocatch hood pins,ram air hood...just stuff thats neat to look at. If you are looking for cheap performance mods that need no tune then the absolute...
  8. spyder7724

    Want to go fast without supercharger

    I've run 11's on the stock engine n/a and don't make that much power. last time i dyno'd mine it only came up with 296rwhp on a dynojet. sometimes it's not about the hp #'s but getting the combination of parts working together. I've spent 2 years figuring out what it takes to get a stock...
  9. spyder7724

    new driveshaft

    yep. sorry for the delay. I didn't expect to sell so many in such a short period of time and it's got us a little behind but we will catch up fast.
  10. spyder7724

    new driveshaft

    First has anything been changed like the UCA or LCA's? no matter what setup you have currently I would install it as is and see how it responds. Most (97%) do not need adjustments but if the suspension has been changed and the pinion angle has been changed as well then you may have to do a...
  11. spyder7724

    Sub Frame Connectors on 08 Vert?

    I read an article a year or so ago and it claimed that the new generation mustang in stock trim is equally as stiff as a fox body(sedan) with a full cage and welded frame connectors. Maybe on a vert if you have loads of torque it's a good idea but probably not as necessary on the GT as...
  12. spyder7724

    Where have all the good driveshafts gone?

    I did the same thing when i called TCI. I just told them what i was trying to do and let them build it for me. it came out to about 4000-4200stall and i actually wish they would have gone looser but that was the limit at the time. i can't argue with the results either. somethings are better...
  13. spyder7724

    Where have all the good driveshafts gone?

    definitely the TC after the Spydershaft :) sorry..:shrug: I can't say who those companies are but I can assure you they are the top tier of Mustang performance parts manufacturers.
  14. spyder7724

    Where have all the good driveshafts gone?

    thats true. Sutton HP does sell them as Spydershafts but we do have a private label program with a couple of very large companies.
  15. spyder7724

    Where have all the good driveshafts gone?

    thats usually a pinion angle issue. the autos are extra sensitive to changes in the driveline and suspension. i experienced the same thing when i first changed my LCA's. once i corrected the p/a it was fine. lowered cars are more apt to experience this since the p/a is altered when they are...
  16. spyder7724

    Anyone have problems with Spydershaft on lowered cars?

    we tackled the automatic cars first cause the hardest one to get right was the auto trans version so we do stress that fact on the website but they work great in manual cars as well. there's always a chance of increased NVH when changing any suspension or drivetrain component in these cars but...
  17. spyder7724

    15 inch for 2007

    i use bogarts which are made for the S197's running a 15" wheel just gives you lots more choices for tires and the wheels are much lighter. i tried a set of centerlines from my brothers fox body and they too hit the calipers. if i ran a spacer they would stick out even more plus i would have to...
  18. spyder7724

    driveshafts

    better acceleration and most of the time smoother gear changes in the manual cars with no clunking. there's always a chance of increasing NVH but thats usually not a problem. ford put that noodle shaft in there to absorb the vibrations and noise they couldn't get rid of and it does a really good...
  19. spyder7724

    driveshafts

    as soon as they tell me their screen name i know exactly who they are and what car they have usually. we don't use our real names much here online so it's hard to remember them cause i usually only see it when the driveshafts get shipped out and sometimes they are going to someone elses address...
  20. spyder7724

    driveshafts

    yeah i just need some good weather to put this thing in the 11's that last run i actually slid the car in the beams a bit too far and it killed some e.t. if i hadn't done that it would have run 12.04 - 12.05 !! it's great to actually put a face to the screen names. just wish i could remember...
Top Bottom
Back
Forums
Menu