Search results

I have a 95 Mustang GT with 110k miles 5 speed, 2.73 gears, 295 rear tires, and only mods to the engine and exhaust are BBK cold air intake and off road pro chamber, and it has O2 sensors that are little less than a year old. Ever since I got the car my gas mileage has been about 170 or 175...

Is my IAC bad? (update: read my last post) So lately I've been having some surging and idle issues with my 95 Mustang GT after doing a tune up a couple weeks ago. I've already cleaned my MAF, IAC, checked the TPS, reset the base idle, but it's still surging. Today I unplugged the IAC with the...

A couple weeks back I did a tune up on my 95GT with new plugs, rotor and cap and MSD street fire wires. Well it started running like crap after that and had a surging idle, bad gas mileage, and wouldn't idle right. I found out the MSD wires were touching the headers so I changed them to the Ford...

My 95 GT was straight piped by the previous owner and I'm planning on getting exhaust soon. I've decided to go with the Mac Prochamber and these Magnaflow Mufflers MagnaFlow 11226 - MagnaFlow Performance Mufflers - Overview - SummitRacing.com . I was wondering if anybody had anybody had any...

So I was looking around the net and found these a arms that the guy said says are 99-04 cobra lower a arms and he is only asking $60 + $40 shipping. I know this is a good deal considering they usually go for 300 new now. Here's the pics he put up. Judging by the pics can someone tell me if these...

So I just bought a 95 gt 5 speed with some shorty headers and straight pipes and 3.55 gears and a BBK air intake installed. The previous owner said it had bad 02 sensors that needed to be replaced and I figured that was the case because I've been driving the car and I've been getting the check...

Hello. I just recently acquired a 95 gt with unknown equal length shorty headers and straight pipe exhaust no crossover piper or anything just straight from the headers to the tailpipes. I like the sound but I really don't want to be hasseled by cops as the previous owner was already pulled over...

Found these gems while browsing ebay today. Honestly what are people thinking? The roof scoops on the second one are just wow.... http://cgi.ebay.com/ebaymotors/67-MUSTANG-FASTBACK-K-CODE-1-OF-A-KIND-MUST-SEE_W0QQitemZ120518447708QQcmdZViewItemQQptZUS_Cars_Trucks?hash=item1c0f75925c...

I have an 87 mustang with a 302 and took out the engine to clean it up and repaint it. Well when I did I lost the camshaft thrust plate and bought a new one to put in. When I put the engine back in the car and started it you could hear the timing gear rubbing against the plate so I took off the...

I have a roller 302 with a t5 in my project Mustang. It was running fine for the month I got it running and the couple of weeks I drove it, although it did run a little rich. One night I kind of got on it then the car started stumbling then backfired and I had to keep giving gas and it kept...

I have a roller 302 with a carb and t5 and while driving tonight I missed a shift and over revved it I think. After the car started running really rough and would backfire and die when I didn't give it a little gas as a tried to get it home. I don't really know what gear or rpm, but I think it...

I have a project 1969 mustang that I swapped a roller 302 into and it has power brakes and front disc brakes. When I first drove the car home with the original 302 the brake pedal was very stiff and hard to push down so I figured it was a bad brake booster so I replaced it and the master...

I have a 69 coupe that was an c6 auto and 302 that ran fine and I swapped a roller 302 and a t5 into. Now every time I start the car by using the ignition switch the starter stays engaged and won't disengage however if I start the car using a remote starter hooked up to the starter solenoid it...

I have a 1969 mustang that I swapped a t5 with a roller 302 into, with a hydraulic clutch system. When I first installed the tranny I bled the hydraulic system and it seemed fine, and the transmission shifted into all gears fine when the motor was off. When I turned the car on the transmission...

So I have a roller 302 with a t5 in my project 69 coupe. I don't have my hydraulic clutch in yet so I figured I would just start the car in neutral so I jumped the neutral safety switch at the firewall by plugging a wire in the connector. The car starts, but the starter won't disengage and keeps...

read the first two pages Bike won't start after using NOS fuel additive : Suzuki GSX-R Motorcycle Forums: Gixxer.com :rlaugh: cliff notes: guys bike was running rough so on the way home he stopped at the gas station. Grabbed two bottles of what he thought was "NOS" brand injector...

So am working on my first project and dropped the motor in and everything and I'm hoping to start it up soon. I don't really know anything about carburetors since this is my first time working on one, but some things seem to missing from mine and I was hoping you guys could help me out based on...

So I'm going to be installing a cable clutch in my 69 mustang with a t5 in a couple weeks. I'm going to be trying to make my own using this clutch cable from Summit Summit SUM-700101 - Summit® Adjustable Clutch Cables . I have long tubes and I've heard all the problems with cables melting, but...

I'm finishing up my t5 swap and just got it bolted to the engine and back in the car. I was installing my cable and noticed there was no resistance on the clutch fork and I could move it back and forth freely with my hand. Is this normal or is there suppose to be some type of resistance on it?

Brake Pedal too high My 1969 Mustang's power brake booster was bad and I needed a new one so decided to perform this swap with a fox body brake booster Fox Mustang Power Brake Booster Install . The article was for 67 and 68 mustangs but I figured it would work on mine. I got everything mounted...