Search results

Ok, tried to start the 86 5.0 that I put in my 66 mustang. leaving everything stock for the 86, two things that are going on, first, the fuel pump does shut off. I can hear it running and running and running while the key is turned on. the fuel pump shuts off once the key is turned off. I am...

Hey guys, posting this here because of the EFI setup on a 5.0 motor even though it's in a 66 mustang. Quick question about the fuel line. I have 30 feet of 1/4 inch EFI fuel line. I went with 1/4 inch because the fittings on the external fuel pump and the fuel filter are 1/4 inch, the motor is...

Hey, I have searched since I figured this question has been asked before. the only thread I found had different wires then mine, so here I am. first off I am posting this question here because the engine, transmission computer and BOTH wiring harnesses are from an 86 5.0 it is in a 66 mustang...

Hey guys, I know this question has been beat to death. just have a quick version of it. from what I can gather by reading other articles, I believe all I need to do is buy a crossmember for my situation. I have an 86 5.0 as a donor car, the frame is bent and the rest of the body needs too much...

Hello guys, I have a 2002 ford focus, 4 door. and I am trying to locate the Inertia switch, or the fuel cut off switch, I have had an idle problem, witch I am sure was due to a vacume leak, me being my lazy self I put if off and then today it died on me, so I popped the hood and sure enough the...

Hey everyone, I have tried almost everything to figure this out except buy a chiltons manual. I have a 92 ford bronco that I recently got back to working condition THANKS TO YOU GUYS. now my front brakes are grinding. I figured no problem I can replace them. took the wheels off and was like how...

Hey guys, Just baught a 86 5.0 GT. when I baught it the alternator was bad so I replaced it. just after replacing the alternator the battery registerd 12.6 with the car off, and 14 volts with the engine running. after driving it around for a few weeks, the battery went dead. the engine wouldn't...

Hello- My brother just got an 86 5.0 I have a question about one of the sensors, it's the sensor on the cold air intake setup, I am thinking it's not supposed to be there. I have looked every where to try to find the wire connector to hook it up and it's no where to be found. Hopefully the...

Hey guys, I have been dealing with this problem for a while now. at first I was having problems with the charging system, The alternater was bad so I replaced that along with the battery since it was old, it was running fine for a little while but now the bronco won't start after it's been...

Hello- My brothers 2001 Bullitt is making noise from the brakes, it's a real bad clunking sound, so I took a look at it and with the tire off I can move the caliper forward and rearward with ease, it hits both the front side of the braket, is this because the pads are warn down too much(witch...

Hey, I have searched and didn't find much on this subject, plenty of info on going the other way. so let the hate mail begine. especially since I am considering doing this to a 01 Bullitt. the reason I am thinking of doing this is my brother doesn't need to be driving a manual, his trans and...

Hello- You guys helped me out with my focus a little while back, hopefully we can ge my bronco taken care of, it's always something isn't it.lol. I have a 92 ford bronco full size, 351w engine with an automatic transmission, it's not starting. when I turn the key on I have power to the...

Hey guys, My 2002 focus won't start, at first I was thinking it was the battery, when I tried to start it would get nothing, the radio would come on but as soon as I turned the key forward to start it everything would go dead, the I turn the key all the way back and turn it forward again and...

Hey guys, thanks for recently letting me know a few things about the bigger style bellhousing. I have a question though. I just found out the 164 tooth bellhousing is ment for going to an 11 inch clutch instead of the 10 inch clutch. well I have the 164 tooth flywheel and I have a 10 inch...

Hello- I know this question has been asked before. I did a search on it and I am now more confused then when I started. the backspacing has me woundering. the deal is I have a chance to get a set of rims from a 2004 mustang gt for cheap, there 17x8. I would like to know if they would fit on...

Hello, I posted this in the Bullitt section but that forum seems to be asleep right now, I have searched on google and on this site and can't quite come up with the answers I need. I am preaty sure the heater core on my brothers 01 bullitt is leaking. coolant on the floors both pasenger and...

Hello- I am going to be replacing the heater core on a 2001 mustang bullitt. I was woundering if it was like the fox body mustangs, where you preaty much have to disasemble the whole dash to get the heater core housing out, any one know if it is like the foxes or not. O also I wanted to...