Search results

  1. rabidscoobie

    Brakes ABS Module Question/Info

    Anyone know if an ABS control module from a 1998 GT will work on a 2004 Mach? I can get it cheap but cant find much info if it will work or not. Im not concerned if my traction control will work all that much but just want my ABS functional again. I know mine is bad since diag tool will not...
  2. rabidscoobie

    Drivetrain Rearend Help.

    Have an 04 mach with stock rearend except using 4.10's. I have been trying to locate new spider and side gears and had no luck so went to local Ford and he told me that for him he cant order because that gear carrier is listed as non-serviceable. I have googled and googled for what I need and...
  3. rabidscoobie

    Car stumbles at higher RPM's?

    Have a 2004 Mach 1 stock.Roughly just at 100k miles. Recently if I floor it in 2nd or 3rd gears and hit roughly 4k+ RPM's the motor bogs almost like no fuel but I can hear small pop sound from under the front floor pans, think more so on passenger side. I have no CEL or codes and other than...
  4. rabidscoobie

    Engine Cant figure out drive pulley's???

    I have an 04 Mach 1 with just barely 100k miles. My issue has me puzzled. If the car sits overnight and it rains during the night then the 1st start of the day the volt gauge will drop instantly from 14v to 12.1v for about 5-10 secs and just before the gauge jumps back to 14.3ish volts the belt...
  5. rabidscoobie

    Backup Lights Fuse Blows???

    Everytime I put it into reverse my fuse for the backup lights blows and soon as the shifter goes into reverse,it is the only time it blows. I even disconnected both tail light housing and harness from car itself, same result. Only noticed this today. Also first week of june up until 3rd week...
  6. rabidscoobie

    Heater Core hose....Part#

    My hose broke at the firewall, the hose end and not the firewall side. I can not find the right number for the 04 Mach. When looking at the 2 hoses, its the hose closest to passenger fender-Left hose when looking straight down. Both of mine have a 90 degree angle most Im seeing dont.
  7. rabidscoobie

    Wheel Combo questions/suspension

    This summer I maybe changing out my wheels( when I need to get tires) and thinking I want to ditch the black bullitts. Wanting to go with the FR500's Black with polished lip. Also want to go staggered. I dont want to go 315's in rear and I dont want overly wide in the front and staying with...
  8. rabidscoobie

    Howl/Moan Sound Issues?

    Ive posted this before but it had stopped for last few months so I didnt worry with it. Well now my issue is back. I have howling/moaning sound coming from the air duct throttle body area. I can remove the entire air duct and the sound is actually coming from the throttle body. I have used some...
  9. rabidscoobie

    Need a replacement for air box assembly

    Im needing this part here in the link: https://www.fordpartsgiant.com/parts/ford-tube-asy_3r3z-9a624-ad.html Really I only need the little scrunched part of the hose but Ford has discontinued it and I cant find one anywhere. Any ideas? Would a cold air intake kit fix this area also? Mine has...
  10. rabidscoobie

    04 Mach 1 Coolant leak

    My 04 Mach has a coolant leak from the metal hose that runs under the shaker on each side to just behind the water pump and pushes into the manifold. No clamps or anything,just pushes in. This summer I had to replace the water pump and ever since then I get a small leak on the driver side of...
  11. rabidscoobie

    K&n Issues?

    Ok have a 2004 Mach 1. Installed a K&N years ago. About a month ago I cleaned and recharged it but every since then in the early morning hours when its 65* or less outside I get an odd sort of grinding sound coming from the air box. It only makes this noise on cool morning and anything under...
  12. rabidscoobie

    Drivetrain So Frustrated Right Now.

    So 2 years ago I replaced the entire clutch, Pressure plate,disk,pilot bearing and TB(FRPP) and all was fine then months or so back the TB started squealing and well of course not happy. I was told the clutch quadrant was in bad shape so I replaced it with a billet amd that fixed some adjusting...
  13. rabidscoobie

    Brake Question....

    I have a question about brake rotors for a friend of mine. He bought a 2000 mustang. But it used to be a V6 that has a 4.6 from a Gt dropped in it with LT headers,BBK valve covers, cold air and 18" wheels, 3.73 gears and has a dyno for around 330hp. I think the fronts are 275/18 and the rear...
  14. rabidscoobie

    Suspension Having Issues...cant Locate Cause?

    I have an 04 Mach 1 that is feeling really loose while driving. The issue is while under acceleration,just normal the front of the car pulls to the left and feels as the rear pulls to the right and the front seems to lift slightly. At the same time this happens I have to slightly pull the...
  15. rabidscoobie

    Window Motor Queation

    I think that my driver side window motor is going out.I can hear the relay click. But sometimes the window just will not go down,sometimes just hitting the door will work.I know it could be a connection issue but I will take it apart and look. My question,is it easier to just replace the motor...
  16. rabidscoobie

    Stalling Issues

    Ok short bit of info. Couple weeks ago I replaced my clutch and in the process I broke the EGR sensor and had to replace with no issues.About a week later my check engine light came on,so I started looking under the hood and found that the elbow for the PCV was cracked causing a vacuum leak...
  17. rabidscoobie

    Help.Hood decal Removal

    I just removed my bad hood decals from the Mach and in the center section it left some residue that I am having hell to get off. I have tried Goo Gone,3M adhesive remover using plastics body scrapers and this crap just will not come off. any advice?
  18. rabidscoobie

    Quick question on Head to Manifold Gasket

    I have had the luxury of replacing the wife's head gaskets on her 2001 Taurus. After looking at the old head to lower manifold gasket I noticed a difference in the slot.The original has a larger opening and the Fel-Pro has 2 small slots.Is this normal?Do I need to leave as is?The last time I...
  19. rabidscoobie

    Help,Cooling Issues

    Help,Cooling Issues-RESOLVED First off this issue isnt my mach,its the wifes 2001 Taurus FlexFuel. The problem was about 2 weeks back it started to run hot since it was low on coolant from a busted coolant tube that goes to the heater core connections.I replaced that,flushed the system and...
  20. rabidscoobie

    Mach 1 Need Some help with Decals

    Recently my factory stripes are starting to bubble and come loose,I eant to replace them and have come across a couple sites with them.I was wondering if anyone might know how good they might be. Black Mustang Mach 1 Hood Decal at AmericanMuscle.com - Free Shipping! * Graphic Express -...