Search results

  1. D

    Nitrous Refill Station

    I am looking for a place where I can get a nitrous refill. Im located in Woodstock GA.
  2. D

    any issues installing heads with head studs IN CAR?

    I just did a head swap with ead studs in my 1993 last weekend. I didnt run into any problems what so ever.
  3. D

    gt40p milled .025 do i need different pushrods

    I am in the process of installing my gt40p heads that i had milled .025 and tfs stage 1 cam with 1.6 rockers. Do i need to order new pushrods or will the stock ones work? Thanks
  4. D

    Please Help My Car is Running Rich at idle.

    It idles fine. I have noticed the when i come to a stop it will hang at 1000-1200 for a second or 2 and go down to about 800 rpm. If i were to clock the C&L should i rotate the sensor toward the fender or toward the alternator? I am currently running a 180 degree stat. I did notice...
  5. D

    Please Help My Car is Running Rich at idle.

    The fact that it smells like raw fuel coming out of the exhaust. The car runs great except at idle.
  6. D

    Please Help My Car is Running Rich at idle.

    No I haven’t done anything to cause this change. No new mods. The only thing that has happened is the colder weather in my area for the last couple of weeks. No, I do not have an adjustable fuel regulator. The last time I checked I was pulling 39psi at idle with the vacuum pulled. The...
  7. D

    Please Help My Car is Running Rich at idle.

    The only code that I got was 11 and according to the manual it means the system is good. I cleaned the MAF this past weekend. When i bought the car it had 30lb injectors installed and shortly after i downgraded to 24lbs. It has ran really well for about 3 weeks then the richness came to play.
  8. D

    Please Help My Car is Running Rich at idle.

    I have been having this problem for the last couple of weeks. My 93 lx is running really rich at idle. I have tried to pull the codes but everything looks fine. I have also replaced the o2 sensors about 1500 miles ago. I am currently running 24lb injectors with a matching C&L tube. Please...
  9. D

    Anyone know of a Dyno in Atlanta

    Thanks for the information. I am new to the Mustang crowd. I noticed that Modular Power House is about 15 minutes from my house. :nice:
  10. D

    Anyone know of a Dyno in Atlanta

    I am looking for a shop where i can get my mustang dynoed. I am located in Woodstock, Ga. Thanks, Daryl
  11. D

    Need help with a T-5 leak

    I have a transmission leak on my T-5 transmission. I have tried to pin point where this leak is going from but I am unable to do so. What are the common areas where a T-5 would leak? Its not the tail shaft seal, speedo gear, or the reverse switch. It looks like it is coming from the front...
  12. D

    What do i need for GT40p H/C/I install

    First off, I want to say thank you for all your feedback. After hearing about getting a custom cam I will take this under consideration. I am going to try to get some additional money together for this. I currently have long tube headers but I am unsure about the manufacture. I guess I...
  13. D

    What do i need for GT40p H/C/I install

    Thanks guys for your feedback. I am going to upgrade the valve springs with TFS springs. I would love to upgrade to better flowing heads and a custom cam but money is tight. I have to also keep this setup emmisions legal. Can you get a custom cam that still is legal. Is in really going...
  14. D

    What do i need for GT40p H/C/I install

    I am in the process of installing some gt40p heads in the next couple of weeks. During this time i am doing a light port job cleaning up all of the areas noted in diyporting.com. What intake and head gaskets should i use. In the future i will be using nitrous so i want a headgasket that will...
  15. D

    What’s a good street cam?

    The previous owner said that the heads were gt40 irons but I havent verified that yet.
  16. D

    What’s a good street cam?

    I just purchased a 93 LX that has an f303 cam. I am looking for another cam that will offer more bottom end torque and a better idle. Does anyone have any recommendations for me? Thanks, Daryl
Top Bottom
Back
Forums
Menu