Search results

  1. 1

    Spark plugs and carbon

    It seems that the 3V has issues with the two piece plugs and carbon build up. What would be good to use in the combustion chamber to keep down the build up of carbon and would it work on the carbon that is already built up? If there is a product that would help melt away the already existing...
  2. 1

    Lower control Arms

    I do not have much wheel hop. I was thinking about upgrading the stock UCA and the LCA with the J&M non adjustable ones, and also the panhard bar. My only performance mods are a CAI and a tune. Do I need to replace both the UCA and the LCA or just the LCA? I do not plan on lowering the car...
  3. 1

    Valve covers

    I was thinking about polishing mine also. Can't decide between polishing them or painting them.
  4. 1

    Question about running through the gears up to 6000 rpms?

    I was thinking it must be the rev limit i was hitting before shifting up. It wasn't from slow shifting because the car nose dived while I was still accelerating in gear.
  5. 1

    What are the minimum suspensions mods you would do?

    An aggressive daily driver.
  6. 1

    What are the minimum suspensions mods you would do?

    What are the minimum suspension mods you would do to help the car stick to the road better and corner better. Not interested in going to the track at this time.
  7. 1

    Lower control Arms

    What is involved in adjusting the upper control arm? Do you need something to check for a correct angle or is it a simple measurement and then adjust the UCA? I probably will not get adjustable control arms because I do not plan on lowering the car at this time but just wanted to cover all...
  8. 1

    Question about running through the gears up to 6000 rpms?

    At the time I did not look at the tack so I am not sure if it went down and then back up. At the time I just shifted into the next gear. The car did a nosedive before I shifted.
  9. 1

    Lower control Arms

    I have the same questions since I would like to also do some suspension mods. If I do not plan on lowering the car, should I get both upper and lower control arms and a panhard bar nonadjustable or would it be better to have an adjustable panhard bar and upper control arm just in case I later...
  10. 1

    Question about running through the gears up to 6000 rpms?

    I have an 06 GT manual transmission and when I run it up to 6000 rpms or a little over it feels like someone is putting on the brakes. Am I hitting the rev. limit or what exactly is happening? I had the traction control turned off.
Top Bottom
Back
Forums
Menu