Search results

  1. 95cbr331

    oil pressure problems

    yeah ive spun the pump counterclockwise trying to get it to prime. Seems like the pump picks up oil but doesnt send it anywhere. In the past ive been able to see the oil come out by the rockers and it doesn't appear its doing this either.
  2. 95cbr331

    oil pressure problems

    Im having an issue with seeing no oil flow...so no pressure, from where the pressure sender resides in the front of the block on the driver side. The block is a dart sportsman, i have a 7qt canton oil pan with the required pickup. And as of far i've tried 2 pumps. The motor has 100 miles on...
  3. 95cbr331

    Wrapping up

    My finals then its finish the mustang time for summer, ,but i got a question i need answered.. My question is when i got my car tuned last May, its had a lot of down time, i saturated the MAf at 5k rpm. So my Tuner john of Horsepower Ranch in Marysville suggested using a mafia Maf extender...
  4. 95cbr331

    Rear Hub Shakes

    yeah my experience is that the axle will pull in and out as well. the calipers kind of dumb down this feeling though, so i was wondering if maybe he had it off and thought that the feeling was excessive.
  5. 95cbr331

    Pulled out that piece of crap radio shack alarm..now door locks no workee..

    if you still have the radio shack unit, look for the part number and post it and i can pull up the manual at work, see if theres any tricks to it.lol. and yes i work at the "shack" You got questions we got answers. haha
  6. 95cbr331

    what the heck is this??

    #4 is the stock eec program as designated by the instructions and5-7 are antitheft
  7. 95cbr331

    what the heck is this??

    Yeah defeinetly a SCT chip. Ive had the instructions for that cable sitting on my desk for a few months.. no time for my car except when my quarters end and have a week off:mad: anyways... The sct chip with the flip switch will allow you to select between the stock tune and 3 other tunes...
  8. 95cbr331

    Rear Hub Shakes

    From that video it doesnt really look like anything wrong from what i can recall. Are the calipers still on when you took the vid, i couldnt tell? the noise you hear is from the rotor clanking on the wheel studs and when you place the tire on, it locatesand snugs the rotor in place. Also when...
  9. 95cbr331

    Vacuum line?...and wire hiding

    yes the evaporator...couldnt think of the word at the time. lol. but yeah I guess i'll keep that vac line. and i was thinking of placing the ccrm on the inside of the bumper on the pass side So i got my motor and the new k-member squared and in, in 5 hours the other night. prettty good time...
  10. 95cbr331

    Vacuum line?...and wire hiding

    Do i need the vacuum line that goes into the firewall with the A/C? All my A/C is removed except the condenser(?) in the dash. Is that line essential to normal heater controls? Im in the process of cleaning up all my wires and vac lines while I wait for the k-member to come in. Just...
  11. 95cbr331

    Anyone Have a Stock Set of A Arms???

    Mine are coming off tomorrow im in WA though
  12. 95cbr331

    ABS IS ACTING WEIRD

    Have u checked the condition of the exciter rings all the way around? Also is it possible to have hit something in the general time frame of the abs problem happening the HCU (hydraulic control unit) is in the vicinity of alot of your front end components. Long shot but possible helpful ideas
  13. 95cbr331

    Pypes performance X-pipe?

    I bought a pypes x-pipe for my old 85, nice fit except that i was converting to dual exhaust but otherwise i was satisfied and it helped produced a very nice tone with the magnaflow catback
  14. 95cbr331

    solid motor mounts

    I agree the vibrations felt through my car were minimal, I only have 100 miles on the car since most the mods but i drove most those on I-5 and the ride was fine. Also I felt more vibrations with brand new energy suspension poly mounts...im using a rubber tranny mount now though.
  15. 95cbr331

    valve cover clearance

    The Tall Ford racing VCs with the red lettering. The egr flange on the stock cobra intake was the issue.
  16. 95cbr331

    Finals Over... time for spring project

    So i bought a k-member. Something I have really wanted to get. Got just the kmember not the whole kit. Car will be on stands until i get control arms and the coilover kit but at least i wont have to pull out the engine again, hopefully. How is everyone? any new updates?
  17. 95cbr331

    valve cover clearance

    VCs on sn95's= :mad: Delayed my whole project by a month. Intake still wouldnt sit right causing boost leaks, even with a spacer.
  18. 95cbr331

    Finals Over... time for spring project

    So I haven't been on here posting in a long time. But i check in once in awhile seeing what everyone is up to. I just finished my finals for the quarter and its time for some R&R and car work.lol An engineering course load it pretty stressful and occupies my time along with work. But...
  19. 95cbr331

    Car randomly shutting off

    Would definetly consider the CCRM.. they tend to be huge culprits. Another problem i had with my fuel pump not priming is the fuel pump circuit in the ecu itself was dead. Frisky electronics!
  20. 95cbr331

    ABS IS ACTING WEIRD

    I had the same issue with my ABS a couple years ago....freaked me out as i was going down a hill. But i traced mine to a short in the wiring, repaired it, replaced fuses and it was still sketchy. I removed mine as i dont plan to be driving in bad conditions and not more than 2k miles a year...
Top Bottom
Back
Forums
Menu