Search results

He didnt do any welding until the car was up on the lift all the way. The doors shut the same as before.... driver side ok... passenger you have to slam bc of sagging door hinges. :D So what your saying is if the doors shut the same not to worry?

I had some subframes installed last week. They where done by a local shop that I was steered to by a few people I know. The car was put on a lift and they where welded on. My questions is.. is there anyway the suspension could have been loaded while it was on a lift? It was not a drive on...

Hmmm... mine doesnt get hard as a rock and not move, does that mean I have a leak for sure or could it be a faulty master cylinder?

Wouldn't that cause the car to miss really bad?

Oh I might also ad i ran the cylinder balance test with a code scanner and it came up number 4 bad everytime. :

Well i guess i'm gonna put it all back together tommorow... what can i clean the carbon off the plugs with? or should i buy new ones, these are only a month old :( I'm hoping that some odd c hance the plugs where just carbon fouled to hell and the tfi was causing the problem but even after...

ya i've checked timing like 20x now the dist isn't moving any, fuel is at 38-40

I'll try to sum it all up. I did the h/c/i swap thing car ran great, 13.2's @ 104 all day. 7 months down the line the car started running slow, 14's at 94 or so. I had bought a new cam as well right before it started running slow. Figured out that my fuel pump was going bad so i replaced...

Tfi wires where fine.... so should i put everything back together and clean the plugs and try it like that and hope they where just fouled from a bad dist/tfi or go ahead and pull the lower and heads and have them checked? I still have oil that leaks into the number 4 cylinder slowly but i'd...

The tfi connector? I'll check that... although i highly doubt it. The plug wires are brand new if that's what you meant. What part of tx you in??

Now that I think about it, it could be carbon that was coming out of the tailpipes, it was black and not runny like oil but just making little black patches on the ground so i thought it was oil. The car has been running SLOW for a long time now that i have been trying to track down. I have a...

I ran the car for 50 miles at least after the dist/tfi swap and it didn't get any better in fact it got worse. :(

I did a compression check and it was within 10% with all of them.... any idea on the carbon buildup though?

So is it possible for them to be carbon fouled from sitting for a week and a half in the motor with the upper and valve covers off? I don't think it's sucking oil from the intake.... there wasn't any in the upper but i haven't gotten the lower off yet. I think it's either bad seating on the...

Car has been sitting for a week and a half, was running like crap and had oil coming out of the tailpipes. I pulled the back plug that has been getting fouled and it had some oil on it. Left the rest of the plugs in and pulled off the upper intake and valve covers. It sat like that for a...

ttt anyone know?

Yes the one that goes on the distributor... if you look at orielly or parts store http://www.oreillyauto.com/B2C/conditionselect.ecatalog?x_0=Y&submit=Continue&vehicle=vehicle0&category=+&group=+&keyword=+sensor&description=2222 they have one for auto tranny and one for manual

I noticed they sell tfis for automatics and manual transmissions. I have one for a manual on my car(and it's an automatic) and didn't know if that would affect performance or not. What's the difference between them?

are those polished alum or chrome? I didn't know they made 94 cobra rims in chrome or polished. Those look great i want them for my car.

This is what my tb goes to with the pedal to the floor...