Search results

  1. armand67Fstback

    Wiper Motor Bolts+washers

    Hi, I need some help putting my wipers back. In what order do the two washers go in relation to the short wiper motor output arm? I know that the nut with built in washer would go on the end to hold it all together, just not sure about the other two parts. Thank you
  2. armand67Fstback

    1967 Fastback Headliner Bow Issue

    I am stuck on this right now. I bought repro headliner bows and do not know the order. Comparing the bows by eye it looks like there is a long, mid, and shorter bow, no color coding on them. Can anyone help with this? I plan on starting this tonight on my 67 fastback and finishing tomorrow.
  3. armand67Fstback

    351w Out Of 1992 F150

    I bought a 1994 F250 351W block and was cracked in one of the cam bearings. It was a total bummer because I paid $300 for the engine intake to oil pan. I ended up getting a 1979 351W from a Bronco and used Howard's Cams Linked roller lifters.
  4. armand67Fstback

    70 must. Which lokar throttle cable??

    Question for other Lokar throttle cable users, how did you attach the gas pedal end of the cable? The eyelet on the engine side of the gas pedal is too large for the clevis.
  5. armand67Fstback

    Shelby fiberglass hood

    I was researching online about a fiberglass hood suppliers and always heard good things about stangaholics restoration fiberglass hoods. If I buy anymore fiberglass for my car I am going with these guys.
  6. armand67Fstback

    Extremely Beat 68 Fast Back

    I am always impressed by how well you know these cars.
  7. armand67Fstback

    Yeah! Paint!

    right on looks great.
  8. armand67Fstback

    Johnnys Car

    That's a really good looking car.
  9. armand67Fstback

    392 Ci Ford Racing - Distributor Gear Wear Out

    Karakedi, I will be going from a junkyard 302 to a 408W soon. I am sure you are very happy with the jump in power with the 392. I ended up going with a Ford Racing Polymer gear although my engine is not done my engine builder says he has installed them with good results. I bought mine at CJ...
  10. armand67Fstback

    Dirt And Sand In The Frame

    My car originated from Porterville, CA a farming community so it was driven in the fields and orchards. I will have to wait until I get it running and pressure wash blast the frame at work and possibly drill a few more drain holes. I can't do it at home the neighbors will complain to the HOA...
  11. armand67Fstback

    Geting Ready To Start On My 69 Shelby Replica -et Five Spokes?

    Horse sense thanks for the input. I had heard about sand warping panels and originally thought you sand blasted the whole car with good results. My car is a California car but as a teenager, I thought it was a great idea to spray on some auto part store undercoating to make the car quieter and...
  12. armand67Fstback

    1965 2+2 Restoration + I6-v8 Progress

    Looks great!
  13. armand67Fstback

    Dirt And Sand In The Frame

    Stangnet, I have a considerable amount of dirt and sand in my frame. I was considering shooting high pressure water into the frame and the area where the transmission mount bolts into. I felt moisture in the dirt I was able to pull out so I do not want to leave it in there but I am concerned...
  14. armand67Fstback

    Geting Ready To Start On My 69 Shelby Replica -et Five Spokes?

    Your project looks great by the way, nothing like doing it yourself.
  15. armand67Fstback

    Geting Ready To Start On My 69 Shelby Replica -et Five Spokes?

    horse sence, did you have to use a fine sand to blast the car? Does the sand blasting remove oil and rubber undercoating well also? I took my car in to media blast and it was turned away because of the rubber undercoating and a little grease/oil. I may sand blast it on the next rebuild.
  16. armand67Fstback

    1967 Mustang Resistor? From Wiper Motor Area?

    The three wires are solid brown, solid green, and blue with a red stripe. Here is pic of the back of the plug.
  17. armand67Fstback

    1967 Mustang Resistor? From Wiper Motor Area?

    Does anyone know what this is and what it does? My baggie is labeled as from the windshield wiper mount. I took this apart like 4 years ago and do not recognize what it does. Thanks for your help.
  18. armand67Fstback

    Sf Bay Area Trans Shops

    Hello, for those of you from the SF bay area, what transmission shop do you recommend to rebuild a T-5 transmission? Thanks for your help.
  19. armand67Fstback

    Brake And Clutch Pedal

    2+2GT, thanks for letting me know where to find it. I will get in contact with Glazier/Nolan.
  20. armand67Fstback

    Brake And Clutch Pedal

Top Bottom
Back
Forums
Menu