Search results

  1. rayvinton

    what do you think it will make

    world block bored to 4.125 complete forged scat rotating assmbely w/ flat tops and a 3.400 stroke should be around 10.1:1 Trick flow fast as cast heads with bowl blend trick flow R intake not the boxed one accufab 90mm TB with a custom ground cam from Camshaft innovations Duration at...
  2. rayvinton

    Intake question

    we are building a 347 and had a question about the intake. we are trying to put the TB directly on the intake instead of putting the elbow on because noone sells a 90mm TB for the 94-95 they are all 86-93 if anyone has any input on that that would be great but anyways is there an intake inlet...
  3. rayvinton

    Boggled

    all we did was is we removed the fuel pressure gauge that goes on the shcrader valve thats it. distributor is dead nuts on, injectors or working great. and fuel pressure is sitting right around 43psi soooooooooo
  4. rayvinton

    Boggled

    ok guys i've got a 94 cobra with a 347 stroker i am getting fuel i am getting spark and i know i am getting compression and the darn thing won't even act like it wants to start any idea's i have tried: holding the pedal 1/4 of the way down and starting it ( nothing ), disconecting the MAF ( not...
  5. rayvinton

    Check this out

    I went to the track on saturday ran the best i ever had i went from a previous 13.6 to a 13.1 it was crazy but the bad thing was i was itching for 12's that i tacked it up to high and launched and SNAP!!!! Snaped the axle right in half hopefully all that is broken but we will see.
  6. rayvinton

    Axle

    does anyone know where i can get a stock 99-04 axle cheap i snapped mine today and need somthing to drive on. thanks
  7. rayvinton

    excessive heat on rear brakes

    i have an 03 gt that i just changed out the back brakes on and i was driving tonight and all of a sudden the brakes started squeaking and then a squeak started going when i was driving down the road ( squeak,squeak,squeak,squeak ) and then when i got home there was a weird smell in the back and...
  8. rayvinton

    looking into cobra

    one of my buddy's that has an 03 he called them runs?
  9. rayvinton

    looking into cobra

    i am looking at getting a 03 cobra and i was told that there are different variations of the 03 could anyone tell me what i need to look for to find these 1 2 or 3(?) variations and which one is the best to get? thanks
  10. rayvinton

    Vortech Owners

    Vortech owners could you please let me know what you guys are making at the wheels, if you are intercooled or not, and what your mods are. I am looking in to a vortech set up but can't afford the intercooler just yet and just wanted to see what type of power i possibly could be making at the...
  11. rayvinton

    NX VS ZEX

    which one is better for nitrous beginners?
  12. rayvinton

    nozzle vs plate

    i was going to run the xe268 or 278 cams with a 100 to 125 shot what all do i need with the nitrous kit i.e bottle heater, window switch, ect....
  13. rayvinton

    nozzle vs plate

    i know this isn't the power adder forum but wanted to hear everyones opinon. I've got an 03 gt with bolt ons and i want to put cams from comp and a nitrous kit from NX or DynoTune on the car. I have been hearing mixed things about going with a nozzle system or a plate system. Could anyone...
  14. rayvinton

    Best K-Member to get?

    This is the UPR Tubular K-member and it comes with all of this for 699.99 here is the link to this part of the web site MUSTANG-UPR Products.com this is the one i am looking at getting they also give you the choice of springs or (spring rate i geuss) sorry didn't read the whole message...
  15. rayvinton

    What Do You Think

    I'm not buying this i just wanted to here everyone's thoughts this frikin kit cost 1700 dollars there is no way i am buying this i would rather spend the money on suspension or something of that nature. Like i said i was just getting peoples thoughts on the look.
  16. rayvinton

    What Do You Think

    hey what do you guys think about this?
  17. rayvinton

    Dynoing on saturday

    i have steeda 18's all around and i still leave the front ones on they weigh about 45 a peice with the tire on it 3.55 gears, steeda triax shifter, and eibach sportline springs
  18. rayvinton

    Dynoing on saturday

    no it has been raining around here and the guy said he doesn't run the dyno when it has rained outside. because of all the tires being wet i guess?
  19. rayvinton

    Dynoing on saturday

    you guys are saying so low but i was just wondering my 1/4 is still at a 13.62 and my 60' 1.88 and this is before the aluminum drive shaft, new 10 way adjustable shocks and a tune. all of these little HP Calculators say i should have around 280's anyway just wanted to hear some thoughts on that...
  20. rayvinton

    Dynoing on saturday

    X That, Dyno day was canceled due to weather it sux but o well had to reschedule to some time in December.
Top Bottom
Back
Forums
Menu