Search results

I have a early 70's style boss block, YSI Blower (700hp) in a Mustang which has a two piece rear main seal. I have replaced the seal twice and it leaked AGAIN!!!! I am using a Fel Pro BS 30136 Seal. The old seal was just basically weeping before, but I wanted to replace it at the same time as...

I have a 93 Mustang right now making 570 RWHP, but will be going up to around 700 RWHP in the next year. I have to change my clutch/flywheel/belhousing due to SFI requirements. It has a older McLeod twin disc right now that isn't working properly. What clutch would everyone recommend?

I have a 93 Mustang LX with a Viper Spec 6 Speed and a McLeod Twin Disc with low miles. The clutch gradually over a short period of time was engaging later and later toward top of pedal travel and now barely moves. I thought it was just out of adjustment but today when I tried to adjust it I...

I have a 89 Mustang that won't start with the key, but starts jumping the selenoid. I re-adjusted the clutch switch on the petal and it still didn't work. This was a intermittent problem at the start and now it happens all the time. The selenoid is a newer one. Anyone have any clue without...

I have a 89 mustang, novi 1000, sct chip programed by the mustang shop, edelbroke intake, lightning mass air, 42 lb injectors and 255 lph fuel pump. Car revs up to about 2500-3000 rpm then goes to idle and dies. I checked vacuum at idle at the intake and there is none, but then when I rev it...

I have a 89 mustang, novi 1000, pro comp heads, 1.7 rockers, sct chip programed by the mustang shop, edelbroke intake, lightning mass air meter. I bought the car half finished and it seems like the previous owner didnt really know what he was doing. I re-touqued heads, re-set valves and...

I have 87-93 Mustang (Vortech blower, aftermarket fuel management, 3G alternator etc) and the alternator will not charge. Alternator did work. I have the battery located in trunk, with a on/off switch by the license plate. This car has been completely re-wired and doesn't use much of the...