Search results

i have a 2000 gt with an 03 engine,a few months ago it developed a pecking noise that sounded like it was coming from either the front of the engine or under cam covers.i took the covers off and checked everything,and put it back together,changed the oil and it helped a lil bit..well i later got...

its a cervini's brand,needless to say it's top of the line brand! it needs a lil bit of prep work before having it painted and other than that its in good shape! i'm looking to get 275 obo. i will not ship due to costing so much unless someone wants to pay shipping.but i am willing to meet...

i have a 2000 gt and i installed a 2003 engine,i also used the engine harness that went with the 03 motor.i still have the 2000 computer in the car and i was wondering if this would or could cause misfire problems??? i have changed coils,plugs,camshaft position sensor and injectors and so far...

i've got a motor that was taken apart and the crank was left in it. i'm ready to put it back together and i was wondering if i need to replace the rod bolts? i know they are torque to yeild but i cant find new bolts.tried summit and they said they didnt list them and said i didnt have to replace...

my 00 gt is knocking like crazy,so a friend of mine from a ford dealer gave me a motor from a f150. it was pulled due to carbon build up on the pistons and the owner went the cheaper route and got a junkyard motor rather paying the dealer labor rates for the original motor.Anyway all i have to...

i was wondering what i'd have to do to install a romeo motor into my 00' gt? it has the original Windsor motor and once again it's knocking like crazy!!! is all the wiring the same?computer???i know the clutch is different but i'm not worried bout that????

i just got my car back together about a lil over a week ago and i added a typhoon intake,l/t headers with the cams i already had.i also got rid of the egr and blocked off the vacum lines.it keeps throwing 2 egr codes along with muliple misfire,system lean bank 1 and sometimes 2,and cylinder...

after i rev my car or pull up to a stop light...ect it idles high for bout 3 seconds b4 it straightens up to the normal idle speed!i'm running comp cams xe278 ah's with l/t headers and typhoon intake..i have everything the cams recommend and other than the idle problem it runs great!someone told...

how many thrust bearings does a windsor 4.6 use???my new bearing kit came with 3 and i think thats all that came out 2 months ago.it looks like it would need a 4th 1 but i'm not sure...help me out somebody!!!

i put a set of comp cam 278's in my oo gt,i bought a typhoon intake,and i have upper plenum and t/b.i've basicly got everything comp recommends except for headers! i cant decide which kind to go with,i've always liked l/t's but my pockets are gettin' empty so thought of going with shorty's. any...

Well i finally pulled the head from my '00 gt and thought i had a bent valve,turns out it had a small piece of metal holding it open!!! It all started when i bought a set of comp cams ( #xe278ah ) i dove into it all without much research and have had problems ever since. when i pulled the timing...

Hey Guys, I have a 2000 GT with a warped valve, (long story) Anyway i found a set of heads at a pick a part today. They are RF-2L1E-6090-C20B. Will these fit with no problems on my engine? They are in great shape. They are on a truck 5.4. Anything I should look for? Combustion chambers...

i found a set of heads from a 94 4.6 and the part # on the head is RF-F2LE-6C084-CB. they have everything but the cam covers.i was wondering if the timing cover would fit my '00 windsor motor????

well i bent a valve in my 00 gt and i have trying to figure out what to do.should i have this head fixed,or buy a diff set,or maybe buy a complete motor to just swap into my car then later build the **** outta my factory 4.6? i dont have a lot of cash to blow on it right now,but i would like...

i was think of buying a lightning maf for my 2000 gt and i have stock injectors a and a sct flash tuner.is there anything else i would need to use this maf???any info would be great.. p.s what size are the stock injectors? 19lb or 21lb?

i installed a set of comp cams,and then new chain tensioner's with guides and when i started the motor it had a bad rattle sound along with a slapping sound! well the slapping sound stopped but it still has a bad rattle coming from under the valve (cam) covers. i need some help with this, i've...