Search results

you can get a 5.o throttle body off e-bay . it will need alil modification but will work ,just the stock 60 mm will be better then the stock 4 clyder one !!!!!

I vote for the V-8 . just can't beat the rumble of a V-8.

What size tire do you have on the car!!

how is that redneck??? i agree with the hood being pulled by the car it come off of !!!!!!!!!!!!!!!!in the mud THATS REDNECK !!!!!!!!!!!!!!!!!!!

You need to put a bigger throttlebody on it , that little thing chokes the crap out of it . You have that big pipe and filter and then it goes to the little hole in the end . but looks good though.

side glass is an easy fix, get a used one ! they have (2) 1/4 inch rivets takes a special rivet gun. remove door panel drill the rivets out , install the glass pop the rivets in , basically your done! The windshield is better left to a pro unless you have done it before . Most places around...

The front of your car will just be a little high! and stiff Just cut a coil or two out of the 4cly springs i would just wait till i got the motor that was going to live in the car then pick out the springs.

I have found 5- 5.5 quarts listed as recommended amounts .with filter change. make sure the car is level when you check it .

http://cgi.ebay.com/3-73-gears-Traction-Loc-7-5-Ford-Mustang-Ranger_W0QQitemZ280196992336QQihZ018QQcategoryZ33731QQssPageNameZWDVWQQrdZ1QQcmdZViewItem this is what you need .

It really depends on your intentions with the car. if you are not gonna go all out with it . then most auto parts store rebuild kits will do! Pulleys don't really do much especially on a 2.3. make sure to do a valve job !

you need 7.5 gears ! those are just gears ,it will not make a posi out of it . just weld up the spider gears ? and make it a locked rear .then buy a 8.8 and buy good parts for it !!! when the 7.5 breaks!

You have a clutch fork( the part that pivits to engage the clutch) and then the throwout bearing that engages the clutch.:shrug: Hope that helps , just put a hydralic throwout bearing in it ?? what exaxtly are you trying to do??

The maximum you should take off is .150-inch, if the rocker rail to deck height is 3.800 inches. just make sure not to cut in to the intake bolt holes!!!!!