Search results

To me fuel injection is a tad expensive a gt40 lower or edlebrock for my 351 w is alot alone.Not to mention the chip ,programming, bigger injectors, calibrated mass air flow sensor, bigger fuel pump, after market upper ,bigger throttle body, and so forth ads up quick.At least with the carb ad...

Changed plan's again now going with a 351w non stroked and a vortech v-1 carbed threw a paxton carb hat.Got 3 pulleys with it a 6lb a 9 lb and a machined 20lb im thinking of going with the 9lb and the holley double pumper carb.Also has a mallory fuel pump and regulator supplying the fuel.

I hope so that would be great i think this conversion will be good for me. upgrading on the fi seems to get so expensive with things like ,ecu,injectors,tuning,fuel delivery and so on.I have no emissions to worry about so no cats and 1 chamber mufflers threw long tube headers is what i am going...

UPDATE i just purchased a 408 stroker kit for this 351w roller and now really am considering this conversion i am still worried about the air bags ,abs,and gauges working any help would be appreciated especially from someone who has done a carb swap on a sn95 stang.Thanks again in advanced for...

Ok need some more help here i was thinking of converting my 95 cobra to carb.Im sure the info is somewhere on here but figured this may be easier :) .I have a roller 351w i removed from a 95 ford f-150 i have been doing some research and think a carb setup would be cheaper in the long run when...

Ok i scrapped the 2000 explorer motor and picked up a roller 351w out of a 95 truck.Will a 2 wheel drive manual out of a pick up work ?This motor is also complete i have a gt40 upper from the explorer motor what motor can i find this gt40 lower for a 351w? or will it be cheaper to buy a after...

understandable i will see if i can get some pictures of the engine up here.I am so excited to get this this on the road it has a bit of money already in it and being a true cobra.Here is a little bit of info about it 95 svt cobra 5 speed Steeda lower control arms Eibach springs Hal...

Thats what i wanted to hear :) ok one other thing will i be able to use the accessories on the front of the explorer engine or will they cause a problem. Other then that i think i may be ok i will have a pic of the car up soon.And will keep people updated on how its coming.And maybe you guys...

Hello i have a 95 svt cobra ,I got it with no motor or trans.I have a 5.0 out of a 2000 explorer and most parts to get it in the cobra.Is this a bad choice?Also what tranny will i be able to use with this combo someone said i will not be able to use a 86 to 93 t5 is this true?I can get bell...

Ok i see one more question how much problems should this e303 cam cause me? Right now it is idling very ruff and burning very rich.I am going to remove the plugs and clean them again and double check the timing i can hear small pops in the exhaust.

Hey i figured it out for some reason if i wire it as a non 5.0 ho it starts right up,So apparently someone put a non ho engine in here even tho it does hold a roller cam ??Thanks for all your help i guess im going to need to convert it to mass air flow because it idling a tad ruff and running...

Pulled the spout connector and still nothing.I have good compression gas and extremely light spark.Do you think maybe a bad ground somewhere or?? i will try anything just throw me some ideas :) Thanks again for your time.

I am unsure where the spout connector is .

Also wanted to ad i can not get my timing light to flash when it is connected to the wire im thinking its because of the weak spark.

msd no spark I messed around with it some more last night and now i get a dull spark at the wire.If i cross the plug wires i get a back fire,im thinking of getting another distributor.Im getting gas for sure my plugs keep getting soaked and i have to remove them and clean them. Maybe my pip...

I just got done reinstalling my 5.0 in my 1988 ford mustang with speed density no "no mass air flow".I installed new timing chain cover new oil pan and gasket, new oil pump ,a set of crane roller lifters,new timing chain,new water pump ,new push rods,a pypes x pipe with no cats,mac shortys,mac...