Search results

Got a new clutch installed yesterday and now the clutch pedal is vibrating when engaged. If I apply a little pressure with my foot it goes away. Guy that installed it said to drive it for a couple days and see if it goes away but I think the problem lies deeper than that, and it is driving me...

How cold is too cold for you to drive you classic during the winter months? Posted via Mobile Device

Getting ready to pull my motor to install my headers correctly (390=pita) and fix a couple other things. My block is in dire need of repainting so I am going to spray it while I have it out. My engine bay is'nt too bad off but there are nicks in the paint in numerous spots so I figured while I...

Wanting to do a front suspension upgrade on my 1967 Fastback. The front end seems pretty loose and worn out so I am wanting to make my next project restoring everything needed. I was looking at the complete kits from CJ Pony Parts and was wanting some feedback as to if you guys thought this...

Just got my new wheels and tires mounted up. Sorry for the cell phone pic quality. I will take some better pics and put them up when I can. Front wheels are 17x8's with Nitto NT 555 225/40/17's Rear wheels are 18x9's with Nitto NT 555 275/35/18's Before:

I'm putting a set of 17x8 Bullitts on the front of my 67 Fastback, and I am going to run a 1" wheel adapter to make them fit. Where would I find a good wheel adapter that I can trust. Found some on ebay for around $60.00. Also found a set of H&R's for around $150. Any of you guys know of...

I've posted about this before in the past but have not until recently been able to go ahead and get some new wheels and tires. I am wanting to know if the below set-up would work on my 1967 Fastback without any rubbing issues. has the stock suspension without the shelby drop. Any help...

I've had her since she was brand new in 2002 and we have been through a lot but I am ready to get rid of her and move on to something newer. Looking at a new F-250 of Dodge 2500. Anyways below id a list of mods and some pictures of the car. Its a 2002 Gt and has 80,000 miles. The front end...

If I were to purchase the Front Brake package from the link below for my 67 Fastback that currenlt has non power drum brakes, what else would I need besides whats inthe kit to complete the conversion. Thanks for any and all help. Brake Packages Calipers/Rotors/Hoses — Vintage Venom...

Just put a set of long tubes on my 67 Fastback s-code 390 car. Currently I am running 2 1/2 inch pipes into a 2 1/4 inch Flowmaster 2 chamber 40 series mufflers. (don't ask why the mufflers are 2 1/4 inch, it's a long story) I want to get a set of mufflers that are have 2 1/2 inch outlet and...

I am wanting to replace my speedo, tach, etc... gauge lens in my 67 but before I go pulling stuff apart I was wondering how difficult this is. Basically how easy does the gauge panel come off?

I plan on doing 17x8's in the front with 245/45-17 tires, and 18x9's in the rear with a 275/35-18 tire. However I am stuck between these two wheel colors, so if you guys don't mind helping me pick which of the two would look the best on my car. Thanks, Wheel 1: Wheel 2:

Do I need to replace my lugs for a longer length if I am putting 17x8 front with a 1 inch spacer, and 17x9 rear with a 7/16 inch spacer? Or are te factory lugs long enough? Also are most of you guys running hub centric spacers or lug centric spacers. Thanks.

I know this is in the wrong section but I thought I would post some pics of my 67 since I usually only post in the 4.6 section anyways and the Classic talk section is has no traffic. Currently in the process on rebuilding the transmission and putting on some ceramic coated longtubes.

Just thought I would post some pictures of my 67. Don't really post much in this section, I'm mainly over in the 4.6 section but I've hit a recent urge to start back working on the classic again. Currently in the process on rebuilding the transmission and putting on some ceramic coated longtubes.

I am wanting to put a set of 17x8 30mm offset on the front and 17x9 24mm offset Bullit wheels on my 1967 fastback. My first question is will the 17x9 24mm wheel fit on the rear or is it too wide? If it will fit what size spacer should I use for the 17x9 wheel? And last, if the 17x9...

Some of you guys might remember me posting some pics of my car awhile back after I changed to black rims and black everything on the car out. I thought I would experiment a little more and put some rim tape on the wheels to break the black up a little. I also swaped the old chrome lug nuts for...

Have a 67 fastback 390 cid car. When the clucth is engaged and I turn the steering wheel the steering linkage is rubbing against the clutch's linkage. Has anyone encountered this problem and if so do you know what to do to fix it? Thanks in advance.

I know this is a weird request, but I am looking to sell my used set of 18x9.5 in. Chrome Cobra R's in immaculate condition. They are the real Cobra R's made by Ford and aren't replicas. If one were to buy them new today they would cost approx. $1,300. What would you guys consider a...

Here are some mustangs that I would post up for you veiwing pleasure. When I see cars like these it makes me proud to be a mustang owner. :D I'm sure this bumper doesn't scrape! Man I love me some skulls, b/c skulls are badass! Best Flame job I've seen in awhile. Wish this...