Search results

  1. 9

    Suspension Rattle

    Yep it was the strut nut. Thanks everybody
  2. 9

    Suspension Rattle

    Ok I confirmed that it's not an interior part and it sounds like it's metal to metal coming from the caster camber plate area. Any other ideas?
  3. 9

    Suspension Rattle

    I have a rattling noise that sounds like it's coming from right behind the dash on the drivers side. It happens when going over bumps all the time and has been getting fairly worse. I can't hear it when I have the windows rolled down so I'm not sure what to do. Anything I can do to try and...
  4. 9

    Help with a noise

    Well I put lowering springs and nwe shocks and struts on my car yesterday and after I was done I took it for a spin and there was now unwanted noises to be heard. When I had the spring out I pin pointed it to the ball joint but when all was completed the noise was gone? I'm not sure what to think.
  5. 9

    Weird AC Smell

    I've been having problems with my AC. Whenever I turn my AC on when the car is idling the alternator charge drops from between the M and the A of normal to the O and R. Along with that the AC puts out a weird smell. It kind of smells like maybe somethings burnt or some type of fluid. This only...
  6. 9

    GM tries to pitch Camaro to gay men

    I love fish sticks in and around my mouth.
  7. 9

    Help with a noise

    Alright finally got around to spraying the bushings and everything and I think that I have gotten it narrowed down to two places. I'm pretty sure that its either the tie rod ends or the ball joints. Is there a way that I can find out which one it is with out having to buy a part first? Thanks.
  8. 9

    Help with a noise

    Was in Michigan last week and wasn't able to work on my car. Now I have and must ask how do you grease the tie rod ends? What do you need to do this? Thanks for the help.
  9. 9

    Help with a noise

    Thanks for the advice I'll definatly try it out. The noise does come from both sides of the vehicle and the cars has not been lowered... yet. Some other information is that it does it when I turn and obviously when going over bumbs. Thanks for the suggestions.
  10. 9

    Help with a noise

    Can somebody help me out and tell me what this noise is? I want to make sure I know what it is before ordering parts for it. Thanks. 6344505f.flv video by pjacobe - Photobucket
  11. 9

    H Pipe Installation Problem

    Sorry, Got all the "Nuts" off but the one. Needs to be a deep well socket because of the stud bolt but with all the combinations I have the socket wont fully fit on the nut.
  12. 9

    H Pipe Installation Problem

    I've gotten every bolt off of the mid pipe except the bottom one of the passenger side. Does anybody have any tips or tricks on how to get this off? It just seems like it is physically impossible to take any angle without having to take something off first. Any help is appreciated, thanks.
  13. 9

    Tranny Problem?

    Any ideas?
  14. 9

    Tranny Problem?

    YouTube - 97 Mustang GT Heres the link to the video and the noise that I am talking about occurs at :32 seconds and it's when I shift into drive. I'm not sure what the problem is, if somebody could help me out that would be great.
  15. 9

    Quick Exhaust Question

    Can I install a 98 GT Pypes Catback Exhaust System on a 97 GT.
  16. 9

    Valve Springs

    COMP Cams: Beehive™ Valve Spring Set; 1.570" Installed Ht. | 0.959/1.061 O.D. Will these valve springs work on a 97 NPI Engine. Thanks
  17. 9

    Weatherstripping issue

    I have this same problem on my 97 gt. I didn't notice it until I was at the car wash:(
  18. 9

    PI Headswap Write-Up

    When I look up these parts quite a few of them are for f150's. Put it also says 4.6l in the description but never says anything about Mustang. What's that all about?
  19. 9

    Sparkplug Blowout

    Thanks for the help. I will try those two things this weekend when I put my cams in.
  20. 9

    the police are gonna love me

    Not gonna lie... That looks pretty bad @ss
Top Bottom
Back
Forums
Menu