Search results

  1. LRSjmac

    speedo gear nightmare....what gear should I have?

    If you have the stock trans & stock rolling diameter rear tires, then yes, 21 tooth will get you correct
  2. LRSjmac

    StangNet '11 5.0 Notch Project

    Sweet!
  3. LRSjmac

    Refresh my memory please..

    They are the inner door belt weatherstrip & we have them in stock, ready to go! If you remember, could you please PM me the name of the salesman that told you otherwise? 1994-04 Mustang Inner Door Belt Weatherstrip Pair at LRS - Same Day Shipping!
  4. LRSjmac

    SVE Mongoose Clutch

    No problem, it's what we're here for! Definitely appreciate the business, & if you ever have any questions don't hesitate to give us a call or PM me here on the forum.
  5. LRSjmac

    SVE Mongoose Clutch

    Agreed, stock quad at least needs to go. You can run a triple hook aluminum quad with a firewall adjuster on your stock cable if it still is in serviceable condition. Also, noticed your sig says 2.73 gears. With that high of a ratio, you are having to slip your clutch a bit on takeoff, so...
  6. LRSjmac

    SVE Mongoose Clutch

    Definitely not. Cable adjustment appears to be incorrect. What cable/quadrant setup are you using? In relation to pedal travel, where does the clutch start to disengage/engage?
  7. LRSjmac

    Which 28oz balancer for our cars?

    The original balance on 1982-1995 5.0L Mustang is 50oz, but being your engine has been rebalanced to 28oz, you'll need a damper like this: 1981-95 Mustang 5.0/5.8L 28Oz Powerforce Harmonic Balancer Kit at LRS - Same Day Shipping! Dont worry Jonezy! You'll be fine!
  8. LRSjmac

    Need some Nitrous Gurus!

    14 gauge wire will be your best bet; I use it to install everything in the system. Keeps it simple! Start out with a .051 Nitrous & a .034 Fuel for a 100 shot & .065 Nitrous & .038 Fuel for a 125. Keep in mind jetting estimates are just that. Depending on A/F ratio & how your plugs read, a...
  9. LRSjmac

    speedo gear

    What trans are your running? If T5, what year? The internal drive gear tooth count determines what driven gear you need.
  10. LRSjmac

    door panels

    No, they are a "build your own" version. It is the lower board & a full sheet of vinyl. You must reuse the aluminum upper from your stock door panels.
  11. LRSjmac

    door panels

    It is pretty impossible to see, so I submitted a request to have new pictures taken with a few different detail shots. Ever evolving process!
  12. LRSjmac

    door panels

    I've personally used both on cars I've built, & I have to admit, the build-your-own economy version is a PITA. The deluxe door panels often sell themselves for simplicity reasons as well as they really aren't that bad of a deal. For instance, lets say you needed all new appointments anyway...
  13. LRSjmac

    any fitment problems with 17x10 4 lug 10th anniversary wheels on 89GT?

    I used the 84 SVO style with the black stripe: 1984 Mustang Svo Black Taillight Lens Kit by OE Ford Tool at LRS - Same Day Shipping! If you wanted it to be 93 Cobra Style, you'd want to use the 85-86 gray stripe: 1985-86 Mustang Svo Taillight Lens Kit Also for 93 Cobra, Charcoal Gray at...
  14. LRSjmac

    any fitment problems with 17x10 4 lug 10th anniversary wheels on 89GT?

    Running a 10.5" rear with a 315 on the rear of a fox just about requires a panhard bar to keep the tire from rubbing the inner wheel well on turns. Mu "normal" setup is 17x9 with 275/40 all the way around. Still requires playing with ride height & rack limiters to completely rid yourself of...
  15. LRSjmac

    Flowmaster American Thunder catback for 11 GT

    You'll be happy to hear that the car in the vid was less than a week old with only a couple hundred miles on the odometer. The axle back was the first & only performance mod installed, still to this day!
  16. LRSjmac

    Need help locating a gasket

    Wow, those bearings certainly were on the fast track to deadsville. I'm glad you got if diagnosed & repaired when you did!!
  17. LRSjmac

    Need help locating a gasket

    I hear you all to well. Please let us know what you come up with!
  18. LRSjmac

    Need help locating a gasket

    Thats what has me puzzled. Lack of friction modifier would just cause a popping on turns. Definitely seek out a knowledgeable local that can help you further diagnose. We can do "differential diagnosis" all day & still not be on the right track as I'm working off assumptions & not...
  19. LRSjmac

    Need help locating a gasket

    Definately acts like rear gear whine. Have you checked the fluid level just to verify? Because of the near impossibility of diagnosing this over the internet, I'd suggest getting an opinion from someone local whom you trust not to try & sell you work you may not need.
  20. LRSjmac

    Need help locating a gasket

    Does the pitch of the whine change on acceleration & deceleration? The fact that you still hear it with the clutch in tends to lean toward the rear axle. Have you put gears in? If so, when?