Search results

  1. 0

    3/8 vacuum check valve. Please recommend

    Hey guys, Awhile back one of you posted a link to an aluminum vacuum check valve that cost around $30. Unfortunately I have lost the link. So if anyone knows of a good 3/8 check valve that I can splice into my heater control vacuum source I would really appreciate it. I have to stop the...
  2. 0

    Swapping to an auto trans from manual

    Nice, i am very happy to see that. TCI told me that they didn,t have a lock up that would handle 600. il just go with the one you showed me. thanks
  3. 0

    turbo stang dies after spinning tires

    just thought ide bring this thread back with an update. I found the solution to the problem. The issue was a boost leak after the MAF
  4. 0

    Swapping to an auto trans from manual

    so i called TCI and they recommended i get a ford aod super street fighter. My problem is i want to be able to have a lock up. The other problem is that i make too much hp for a lock up. Does anyone have any specific info on being able to control lock up with a switch. i figure if i can control...
  5. 0

    Swapping to an auto trans from manual

    was your car originally an automatic? would i be able to take a 4R70w and control it mechanically with a full manual valve body? The only reason i suggest such a thing is ide like to retain some ability to cruise on the highway and the 4speed would help that.
  6. 0

    Swapping to an auto trans from manual

    Hey guys. My horse power is far surpassing the limits of my stock 5 speed. So since I am planning on making this an agressive street/strip car I was thinking about going with an automatic trans. Is this possible to switch from a stick shift to an auto? If so what are your recommendations for...
  7. 0

    misfires on turbo and vaccum leak help!!

    I am running a tr6 v power plug gapped to .30 where could I get one of those inline check valves?
  8. 0

    misfires on turbo and vaccum leak help!!

    Hey guys. I have been having trouble with my turbo 4.6 running 16psi . everytime am wot i get a misfire code. thus far i have pulled po306 and po302.Not sure what to do about this. Also i have my climate control vaccum source hooked up to the stock location. So it is seeing vaccuum and boost...
  9. 0

    turbo stang dies after spinning tires

    the maf is about 1.5 feet away from the bov. the car does feel like it falls off sometimes if i boost through a gear and then let off abruptly. if i go through the gears it doesnt always fall on its face unless the tires are spinning as specified in my original post. i am running a kenne bell...
  10. 0

    turbo stang dies after spinning tires

    the bov is before the maf. the maf is also in stock location.
  11. 0

    turbo stang dies after spinning tires

    thanks guys. the only reason i asked about the knock sensors was because i didnt want to have the car detonating and be obliviouse to it.
  12. 0

    turbo stang dies after spinning tires

    is it possible that my knock protection kicked in? i didnt hear any detonation but that would take all the power away correct?
  13. 0

    turbo stang dies after spinning tires

    thanks don, i am running a blow through set up. is it possible that my bov could be leaking due insuficient spring pressure? all of my connectors seem to be air tight.
  14. 0

    turbo stang dies after spinning tires

    deffinetly not rev limiter. because it happens after i let off. from what everyone is saying i can think it is probably i spark issue. i will have to order up the boost a spark and change the plugs and see what happens. as for not tearing through the gears, yes that is out of the question. :D
  15. 0

    turbo stang dies after spinning tires

    hey guys thanks for the prompt response. i am running ngk tr6 plugs at a .30 gap. stock coils. i do not have a fuel pressure gauge. traction control is deff off. as for spinning the alternator too fast, that makes sense because its close to redline in this situation. why do i keep getting...
  16. 0

    turbo stang dies after spinning tires

    hey guys, every time i burn through first and second gear my car hesitates and shakes after i let off the throttle. It did it tonight and when i went to go shift third while buring through second gear the car totaly lost all power when i mashed on it in third. The car doesnt die out under hard...
  17. 0

    intake manifold and tb combo on turbo stang

    hey guys, i am looking for some advice on what throttle body and plenum to use. my set up is an mmr900 short block with pi heads with a single 60mm turbonetics turbo. this winter i plan on getting the edelbrock victor jr intake. i want to get the edelbrok intake elbow as well. my problem is...
  18. 0

    pi cams in t bird

    I have a set of pi cams with 55k on them. I wanted to sell them to my friend who has a 4.6 t bird. will they fit?
  19. 0

    wheel alignment after k member install

    Hey guys, I put a qa1 k member and coil overs in my 2002 mustang gt. i know i need a wheel alignment. when i called the shop to make an appointment the guy asked me if qa1 had any special line up specs or if it was to be lined up to stock specs. are there special line up specs or do they just...
  20. 0

    lift points on 2v 4.6

    Hey guys. I need to lift my engine up off the k member becuase i am replacing the oil pan with a mmr 7 qt unit and swapping out the k member with the qa1 kit. i was just wondering where the factory/best lift points were on the motor because i am going to have to support it with a cherry...
Top Bottom
Back
Forums
Menu