Search results

  1. 95 Black Mamba

    need help getting power to fuel pump

    i must of removed some wiring that powered the fuel pump:nonono:,so i found the the fuel pump wire and had to run a switched hot to it
  2. 95 Black Mamba

    need help getting power to fuel pump

    found the problem and got it going should be able to fire it up tomorrow:D
  3. 95 Black Mamba

    need help getting power to fuel pump

    thanks for the reply i checked the switch(inertia)if thats the one in the hatch:shrug:going out there right now to check the harness under the hood for the pink/black hopefully i can find it and run a switched hot to it or it could be as simple as a ground we'll see
  4. 95 Black Mamba

    need help getting power to fuel pump

    Hey guy's could someone help me out here please?This is my project.I bought a 95 v6 mustang that i am putting a 6.2 escalade motor in.The v6 is out and the escalade motor is in.I left most of the factory wiring in place except for the wire's that ran to the v6 intake(sensors,throttlebody).When i...
  5. 95 Black Mamba

    Any cheap solutions to hooking up????

    i would say lower arms for sure if you dont want to buy them just throw some poly bushings in your stock arms and box them in your self and some drag radials and some sub frame connectors and call it a day
  6. 95 Black Mamba

    Not An Aluminum DS ***Bummed***

    That dude shouold of known it wasn't aluminum right away by the weight i think he was trying find a sucker.............you should be able to pick a aluminum ds up with one hand very easy:shrug:
  7. 95 Black Mamba

    few new pics

    Nice looking pic's
  8. 95 Black Mamba

    Don't know if it's true?????

    haha:hail2:
  9. 95 Black Mamba

    motor and trans are in

    well today i got the engine all wired up built my cross member and mounted the trans cooler,fan and radiator.Doesn't sound like a lot but the day sure does go by fast:shrug:
  10. 95 Black Mamba

    Strut install?

    i just intsalled my a-arms spring's and struts lastnight and had the same problem .what i did was took a longer bolt (like 3in) and stuck it through the plate and hole and pulled the strut up that way until i could get the nut's started on the strut's work good..........dont know if yours are...
  11. 95 Black Mamba

    motor and trans are in

    well finally put the trans and motor in for good i hope.Tomorrow I'll make up a new trans cross member and start wiring the and mounting the msd box.Dont know a bought the stock a arms the bolts where a pita to get out so i might just do the coilover conversion and tubular a arms since i already...
  12. 95 Black Mamba

    New wheels

    Car looks good with those rims:nice:
  13. 95 Black Mamba

    what do you guys think of the grille?

    It's a piece of steel mesh that was cut to fit then painted black,it was on the car when i bought it but it was pretty rusty
  14. 95 Black Mamba

    what do you guys think of the grille?

    your right i think with the 4 in cowl hood i'm putting on it it will look better:shrug:the motor is a 6.2 out of a 07 escalade and yes its going in the stang
  15. 95 Black Mamba

    what do you guys think of the grille?

    what do you guys think of the grille
  16. 95 Black Mamba

    Anyone who has deleted their A/C.....

    hey i have that line pm me if you are interested
  17. 95 Black Mamba

    started on the motor swap

    i got a cam picked out from livernios motorsports that sgould put around 520 rwhp we'll see :shrug:
  18. 95 Black Mamba

    Anyone who has deleted their A/C.....

    man i'm sorry but i just cut it out of my car lastnight.you might want to check with a salvage yard and sure it will fit off of other models
  19. 95 Black Mamba

    started on the motor swap

    the motor is 6.2 out of a 07 escalade with l92 heads.........the motors are under rated at 403 hp@5000 rpm and 476 tq at 4200 stock
  20. 95 Black Mamba

    started on the motor swap

    yeah i'm going to clean up the engine bay and also hide all the wires.and the pics show up in vertical order when i view the post don't know what happened there also my sub conectors came today:D
Top Bottom
Back
Forums
Menu