Search results

It's me again. I was wondering if anyone can help me and steer me in the right direction as to installing lowering springs and shocks and struts on my 2004 V-6. I got the Eibach pro kit lowering springs along with the pro damper kit (if that helps). A shop out in town is charging me nearly 600...

I recently installed a dual exhaust on my 2004 v-6. After driving it for a while and bottoming out I had noticed my brake light went on. After parking my car I noticed that it was leaking brake fluid near the rear axle and come to find out,the exhaust pipe was making contact with the brake line...

I notice a leak on my 2004 V6 today when I had it on a lift. I had changed my brakes and noticed that my brake fluid was low so I bled the system and added more brake fluid. When I pump my brakes everything went well but then my brake light came on and my friends is telling me there is a leak...

I just purchased a new TPS because my old one broke. The guy at the parts store said I would need a volt meter so I can make sure it performs as needed. Does anyone know how to install the TPS and adjusting it with a volt meter? I thought all I had to do was screw it in.

This forum is by far the best organization I couldve joined. All the people here have a lot of Mustang Know-how that others can learn off of. It saves alot of money on finding out what the problem is instead of taking to a shop for a diagnosis. This is the first place I go to when Im having...

I need a new Throttle Position Sensor, ive been driving my car without one since September of 09, I just thought it was time to get off my lazy a** and get one. I have a concern though, Im wondering if I order a new TPS online if it will come with the two screws to put it on my TB. The screws on...

Does anyone know where I can find Tranny mounts for an 04 V-6, I looked everywhere online but i only find them for the V-8. My tranny is starting to clunk when I shift or turn it off. Is it urgent if the clunking just started? Any advice on whether I should keep driving it?Thanks!

I was at the shop today purchasing some PB blaster and I noticed an ENGINE FLUSH fluid on the shelf. Since I am changing my oil this weekend I thought I might do the engine flush as well but I wondered if it would harm the engine. The directions on the bottle say to pour all of the contents into...

Today we were installing a set of JBA cat4ward headers on my 04 V6. We managed to get the left header in with no problems but as soon as we were about to take the right side header off we noticed its attached to a metal hose. We cant think of a way to get in there to disconnect. Im wondering if...

I bought some JBA cat4ward headers and Ive had them sittin around in the trunk for about a month. I still questioning my mechanical abilities and I was wondering if anyone could tell me or give me an idea of how to install these instead of having to pay a mechanic 80 an hour. They are for a 2004...

My clutch got messed up, it started making a loud screeching noise and the shifter and clutch pedal would shake or vibrate soflty, while looking for a place to park the clutch made a metal against metal clunking sound everytime I pressed it and it made the pedal a little stiffer. I bought a new...

I put on a new Throttle body on my car this weekend and when it came time to take off the TPS it wouldnt come off the old throttle body and I gave it a little more force and it came it.....broken though. everything on the inside of it fell out and seemed unrepairable. When I tried turning on my...

I have a 2004 V6 Mustang 5 spd manual, it has about 62k miles, as I was driving on the highway the car turned off and the "Service Engine Soon" light came on, I pulled over to the side of the road, I then put the car in neutral and tried restarting it and it came on and this time there was no...

i have a 2004 mustang V-6, i tried to put speakers in the front doors (didnt have any when i got the car) and it turns out that the mounting brackets are missing (black oval plastic to mount the speakers), the previous owner stripped the car completely and he removed the brackets, does anybody...

i just ordered the Pypes 309 Dual Exhaust that bolts on to the stock mid-pipe for my 04 V6 Mustang, i have no idea how that will sound, if anybody has heard that exhaust on the v-6, does it sound good? i dont want the "ricer" sound, and what kind of headers should i put on it? should i go with...

i recently installed a new head unit on my 2004 v-6 mustang, the wirig harnesses were no help so i decided to cut and splice wire by wire, the head unit turns on and plays good when the car is in accessory mode (on but not running), when the engine is running however, the clutch makes a...