Search results

  1. T

    Losing fuel pressure

    As stupid as this sounds I had a similiar problem a while back. I would check my fuel pressure and it would be different every time. Come to find out when i put my new injectors in I didn't have a fueline goining the fuelrail connected all the way. Did not leak any gas but got to playing around...
  2. T

    3 different lifters won't stay pumped up

    Hi all I have a 87 mustang with a fresh 5.0 motor and ecam in it. The problem I have is a little valve train rattle that I have narrowed down to cylinder 4 on the exhaust. It has been converted over to stud mount rockers and has ford racing 1.6 roller rockers. It started rattling so I went...
  3. T

    Motor knock with good oil pressure?

    Thanks for the reply Yeah I can get the pan off with the motor still in the car I just hope the crank is still ok
  4. T

    Motor knock with good oil pressure?

    Hi all I just recently rebuilt a 87 5.0 motor for my 67 cougar. The block is bored .030 and the crank is turned .010/.010. I got about 75 miles and now I can hear a knock coming from the motor. It sounds kind of like a rod knock to me but the question I have is could a rod be knocking with a...
  5. T

    msd 6al-2 install

    Hi just got a 6al-2 for my 87 lx 5.0 5speed and was trying to figure out how to hook up the 2 step part of it.The diagram that came with it just shows the blue wire going to launch device and add 12v to it. Was hoping somebody had already hooked one of these up and just used the switch that is...
  6. T

    GT40P Headers??

    By the way I got my plug wires at autozone with the 90 degree boots at autozone for 30 bucks they were accels brand
  7. T

    GT40P Headers??

    I have the bbk unequal length shorties on mine with the 90 degree boots and for insurance got heat sleeves on 7 and 8 and no problems
  8. T

    GT40 heads,Trick flow intake with TFS stg 1 cam?

    Hi I have a 87 lx with gt40ps and tfs1 cam 70 mm tb 24lb injectors performer rpm intake and 1.6 rr 3.55 gears and 5 speed and runs ok. Love the sound but hoped the performance would be more. Haven't had it tuned yet pulls good from 2500 to only 5000. Cam is advertised 2500 to 5500 but mine seems...
  9. T

    87 Mustang with a miss when it warms up

    sometimes a 33 and a 44
  10. T

    87 Mustang with a miss when it warms up

    I have a 87 lx 5.0 5 speed with gt40p heads and tfs stage 1 cam maf conversion. Got the thing together and ran great. I was letting sit there and idle for a while and noticed that the idle dropped down and started loading up and wanting to die. Gave it some gas and went and ripped it a little...
  11. T

    Another maf conversion problem

    Hi I have a 87 lx convertible that I just added gt40p heads tfs stage 1 cam and mass air to and I was wondering were I could find a bracket to put the computer back up were it belongs because my speed density computer is about A 1 1/2 shorter about a 1/2 inch thinner than the a9l I have. I have...
  12. T

    Error Code 14, what does it mean?

    Hi I have a 87 mustang that all the sudden started running real rich and started missing. Pulled the codes and it gave me the code 14. Found this post and changed the tfi and no difference so I ordered a distributor figuring it had to be the pip sensor mentioned in this post got it put in no...
  13. T

    No fuel pump

    Hi I have a 87 5.0 lx 5 speed That the fuel pump does not kick on. I have replaced the relay and looked at diagrams that tell me from what I see the the red wire to the relay is suppose to when you turn on the switch power the pink one that goes to the pump. I cannot get the pink one to have any...
Top Bottom
Back
Forums
Menu