Search results

  1. B

    car overheating at idle and peeing coolant. help please

    are your low and high speed fans turning on?
  2. B

    98 GT Parting Out

    PM'd you back
  3. B

    98 GT Parting Out

    cd player and harness are gone, sorry.
  4. B

    98 GT Parting Out

    I believe I do. PM me an offer and zip and I will double check the switch
  5. B

    98 GT Parting Out

    PM'd
  6. B

    98 GT Parting Out

    PM me an offer and your zip and I can work out shipping. In the mean time I will check the condition.
  7. B

    98 GT Parting Out

    seats are not in the best condition.
  8. B

    98 GT Parting Out

    PM'd
  9. B

    98 GT Parting Out

    Parting Out a 98 GT. Front end is totalled. Unknown on engine and trans so far. I will dive into those later on but lots of good other parts, let me know what you need. Make offers on stuff. Thanks
  10. B

    What Tuning Software should I buy?

    You might be able to get your tune close without a dyno, but not exact. You will need AFR for sure so that means wideband also. If you want max power, you will need to take it to a dyno, whether you tune it yourself or have someone do it. You can only dial in spark with a constant such as...
  11. B

    What Tuning Software should I buy?

    With Sniper you don't want the Special Forces. You want Commando. It is the one that has all the variables you can change.
  12. B

    PI Head Swap Question

    PI head and NPI spark tables are very different, especially at the part throttle applications. its like throwing a bunch of global timing in there. That being said, I have run a PI engine on a hot NPI tune in a heavy car and been fine with 91 octane. I did retard the timing 2 degrees, also...
  13. B

    Need recommendations for white gauges

    You could do a Cobra cluster.
  14. B

    found a motor

    Twist and pull. If the O rings are shot, get some from the dealer.
  15. B

    preference on engine removal

    I built a custom bracket that you can see in my previous pics. Cheap and effective, and you can remove and install the whole complete engine with manifold on without crushing the valve covers. Also it uses 12mm bolts that are much stronger.
  16. B

    preference on engine removal

    I pull them as a unit, engine and trans for that reason.
  17. B

    How to remove the waterpump nipple.

    Heat it with a torch first then smack it out from rear to front. if it collapses or shears take a socket the same diameter as the hole it is seated in and go for it. It WILL come out.
  18. B

    clutch

    I run a 10 1/2 RAM HD clutch in my car that wieghs 4200 with me in it. What are you looking for specifically?
  19. B

    motor from a 94 t-bird

    Yo would want to, the heads on that year sucked majorly.